Table of Contents
Advertisement
9. Orient the Seat Post (10) as shown. Loosen the
Post Knob (18) a few turns, pull it outward, and
insert the Seat Post into the Frame (1).
Then, slide the Seat Post (10) upward or down-
ward to the desired position, and release the
Post Knob (18) into one of the adjustment holes
in the Seat Post. Move the Seat Post upward
or downward slightly to make sure that the
Post Knob is engaged in one of the adjust-
ment holes in the Seat Post. Then, tighten the
Post Knob.
10. See the inset drawing. Remove the Carriage
Knob (15) from the Seat Carriage (11).
Next, set the Seat Carriage (11) on the Seat Post
(10) and hold it in place.
Insert the Carriage Knob (15) upward into the
Seat Post (10), and tighten the Carriage Knob
into the Carriage Bracket (14) inside the Seat
Carriage (11). Make sure that the Carriage
Knob is tightened into the Carriage Bracket.
9
Adjustment
Holes
10
1
10
11
10
15
11
18
10
14
15
11
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 135 CSX and is the answer not in the manual?
Questions and answers
How do I replace battery
To replace the battery in a Pro-Form 135 CSX:
1. Remove the screws securing the battery covers.
2. Take off the battery covers.
3. Insert four D alkaline batteries, ensuring they are oriented as shown in the battery compartment diagrams.
4. Reattach the battery covers and secure them with the screws.
5. If the console was exposed to cold temperatures, allow it to warm to room temperature before inserting batteries to prevent damage.
This answer is automatically generated