Pro-Form Trainer R14 User Manual page 10

7. While a second person holds the Console (75)
and the Upright (77) near the Frame (1), con-
nect the Upright Wire (84) to the Main Wire
(109). Tip: The wire connectors should slide
together easily and snap into place with an
audible click. If they do not, turn one connec-
tor and try again.
Tip: Avoid pinching the wires. Attach
the Upright (77) to the Frame (1) with four
M8 x 35mm Screws (82); start all the Screws,
and then tighten them.
8. While a second person holds the Neck (76),
loosen and remove the Handle (78) from the
Upright (77). Note: The Handle functions like a
ratchet. Turn the Handle in the desired direction,
pull it outward, turn it in the opposite direction,
push it inward, and then turn it in the desired
direction again. Repeat this process as many
times as necessary.
Next, identify the Right and Left Upright Covers
(80, 81), and orient them as shown.
Press the Right and Left Upright Covers
(80, 81) together around the Upright (77), and
attach them to the Upright with two M4 x 16mm
Screws (68).
Then, insert the Handle (78) into the Right
Upright Cover (80) and tighten it into the
Upright (77).
7
75
Avoid
pinching
the wires
8
81
68
10
82
77
84
1
109
76
77
80
68
78