Operation - Pro's Kit MT-7071N User Manual

3.Operation

Do not connect with DC voltage over 60V or any AC
voltage live circuit equipment or it will result damage.
Press " "key to power on, as show blow. Press"
to choose function. Press"
Note:
The arrow "▲" on the LCD display indicates the test port
location of the network cable to be tested.
▲
Type:Ca t5 e/6/6a
Press ENTER Test
graph 1
Graph 1: The cable shall be inserted into the middle RJ45 connector.
Graph 2: The cable shall be inserted into the left RJ45(with LED)
connector .
3.1 Cable map test：
Ø Insert the pending network cable into the transmitter RJ45 socket in
the middle and the other end into the receiver socket or remote unit,
BNC coax into BNC socket.
Ø Select the "CONT" menu and press "
shown below:
UTP
"key to test. Press"
!"#$%
▲
Le ngth
Typ e:Cat.5e/6/6a
Start Te st
Un it: Meter
graph 2
STP
5
" or"
"key to return.
" to test with test results
"key