Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Pro's Kit MT-7801
Summary of Contents for Pro's Kit MT-7801
- Page 1 Optical Laser Source MT-7801/MT-7802/MT-7803 English English...
- Page 3 Optical Laser Source MT-7801/MT-7802/MT-7803 English English...
-
Page 4: Warning And Note
WARNING WARNING VISIBLE LASER RADIATION VISIBLE LASER RADIATION AVOD EYE OR SKIN EXPOSURE AVOD EYE OR SKIN EXPOSURE You are cautioned that changes or modifications not espressly approved in this document TO DIRECT OR SCATTERED RADIATION TO DIRECT OR SCATTERED RADIATION SEMICONDUCTOR LASER SEMICONDUCTOR LASER could void yout authority to operate this equipment. -
Page 5: Table Of Contents
Contents 1. Warning and Note 2. Accessories 3. Product presentation 3.1 Description 3.2 Install the battery 3.2 On/off and permanent on 3.3 Backlight function 3.4 Select wavelength 3.5 Modulation wave output 3.6 Wavelength identification 3.7 Battery energy Indicator 3.8 Battery charge 3.9 Maintenance and solution 3.10 Detail parameter... -
Page 6: Accessories
Check the accessories Standard Edition PERM Set >2s OFF Optical Laser Source MT-7801/MT-7802/MT-7803 MT-7801 MT-7801 English Fiber Optical Light Source Fiber Optical Light Source Wavelength:1310nm / 1550nm Wavelength:1310nm / 1550nm Host Damping Jacket User's Guide Packet Optional 2x AA LR6 1.5V or rechargeable battery... -
Page 7: Product Presentation
Description Fiber optic adapter Charging Socket PERM Set Power Button >2s OFF Wavelength ID Output wavelength switch button Load modulation frequency MT-7801 MT-7801 Fiber Optical Light Source Fiber Optical Light Source Wavelength:1310nm / 1550nm Wavelength:1310nm / 1550nm... -
Page 8: Install The Battery
Installing the battery 1.Pull the battery cover 2.Installing the battery 3.Push the battery cover 4.Complete... -
Page 9: On/Off And Permanent On
If you need to shield this function and enable the meter keeps PERM Set >2s OFF on working, only need to press the button and hold when you MT-7801 MT-7801 Fiber Optical Light Source Fiber Optical Light Source Wavelength:1310nm / 1550nm Wavelength:1310nm / 1550nm boot the instrument. -
Page 10: Backlight Function
>2s OFF button, you can control the backlight function on or off. The backlight function is used when you want to use the meter at night or darker occasions. MT-7801 MT-7801 Fiber Optical Light Source Fiber Optical Light Source Wavelength:1310nm / 1550nm... -
Page 11: Select Wavelength
>2s OFF the required output wavelengths. Details refer to the parameters table. The power meter or other measuring equipments should correspond the wavelength of the light source. MT-7801 MT-7801 Fiber Optical Light Source Fiber Optical Light Source Wavelength:1310nm / 1550nm... -
Page 12: Modulation Wave Output
PERM Set >2s OFF confirmed carrier frequency in the current output laser. This instrument has three carrier frequencies for selecting: 270Hz, 1KHz,2KHz. MT-7801 MT-7801 Fiber Optical Light Source Fiber Optical Light Source Wavelength:1310nm / 1550nm Wavelength:1310nm / 1550nm... -
Page 13: Wavelength Identification
'ld'. When connect with the power meter supporting wavelength recognition function, it can show the current output wavelength of light source, and switch to measure the wavelength MT-7801 MT-7801 Fiber Optical Light Source Fiber Optical Light Source... -
Page 14: Battery Energy Indicator
Four levels indication of power detection Represents the remaining 80%---100% electricity PERM Set >2s OFF Represents the remaining 40%---80% electricity Represents the remaining 20%---40% electricity MT-7801 MT-7801 Fiber Optical Light Source Fiber Optical Light Source Wavelength:1310nm / 1550nm Wavelength:1310nm / 1550nm... -
Page 15: Battery Charge
If you do not stop recharging at this time, the in strument will continue the trickle charge state, using small current to supply natural discharge. But this MT-7801 MT-7801 process is not more than 48 hours. -
Page 16: Maintenance And Solution
Meter Maintenance and Solution General maintenance Optical fiber connect the adapter should avoid contacting with hard objects and keep clean. Should be stored in a dry and ventilated place to avoid moisture. When un use for long time,should remove the batteries before storage. Fault and solution Solution Failure name... -
Page 17: Detail Parameter
Detail Parameters MT-7801 MT-7802 MT-7803 Wave source type 1310nm/1550nm@FP 1490nm@DFB Wavelength 1310nm/1550nm(SM) 850nm/1300nm(MM) 1310nm/1490nm/1550nm(SM) >-5dBm Output power >-10dBm >-5dBm Optical connector SC/PC 0.05dBm/1 hour 0.1dBm/8 hour Stability Modulation wave 270Hz 1KHz 2KHz Auto off 10 min can be cancelled Low batter y warning...
Need help?
Do you have a question about the MT-7801 and is the answer not in the manual?
Questions and answers