Battery Replacement - Pro's Kit MT-7071N User Manual

Note:
l This function is for reference, the voltage may still remain even
there is no detection showed up. There are many possible
factors might block the detection.
l There are external sources (like flashlight and motor) may trigger
non-contact voltage detection.
3.7 Flashlight
Ø Push the receiver switch to the "
auxiliary lighting LED is turned on for lighting with insufficient light.
Ø Only for lighting in the case of insufficient light, do not use it for a
long time to save the battery.

4. Battery Replacement

When the battery symbol on the transmitter display is low, replace
Ø
the battery. When the receiver power indicator flashes, the battery
is low, replace the battery.
Ø The battery is 6F22 or 6LR61 9V battery, and the better
performance 6LR61 alkaline battery is recommended.
Turn off the Transmitter or Receiver and disconnect all test
Ø
leads before replacing the battery.
Properly install in the case to power the Transmitter and
Ø
Receiver.
" position, and the front LED
11