Page 2
Thank you very much for purchasing Pro’sKit MT-7063/MT-7064 PoE & Lan cable tester. This product is ideal for testing live Ethernet cables and determining continuity of network and telephone cables. Features : PoE Tester • Easily tests Ethernet network for Power over Ethernet existence •...
Page 3
This unit is an easy-to-use in Power over Ethernet(PoE) adapters for professionals, businesses and home users to determine the existence of Power over Ethernet. Operation (MT-7063) 1. Connect one end of cable into the PoE connector on the left side of the instrument.
Page 4
30W. (PD Max 25.5W) Test result 3: When LED "D3" light is on, it means power is provided by Mid-span(45/78), and it is 802.3af standard, the output power is 15.4W. ( PD Max 12.95W) Test result 4: When LED "D3"and "D4" lights are on at the same time, it means power is provided by Mid-span (45/78), and it is 802.3at standard, the output power is 30W.
Page 5
If there are several pins that are not connected, there are several lights that will not turn on. If less than two pins are connected, none of the lights are on. CROSSOVER If pins are crossover, for example NO2 and NO4,the result is displayed as below: Master Tester: 1-2-3-4-5-6-7-8-S Remote Tester: 1-4-3-2-5-6-7-8-S SHORT...
Need help?
Do you have a question about the MT-7063 and is the answer not in the manual?
Questions and answers