Operation Function - TECHCON SYSTEMS TS6500CIM User Manual

7.2 Operation Function

DESCRIPTION
1 Plunger Bracket
2 Cartridge Holder
3 Guide Block
4 Air Plunger Inlet
5 Pressure Relief valve
Drive Spindle with
6
Injection Rod
7 Start Buttons (Green)
8 Control Buttons
9 Air Regulator
Emergency Stop
10
button (Red)
11 LCD Display
Protective (Safety)
12
Cover
13 Plunger Disk
14 Fluid Level Sensor
• Holds plunger assembly when not in use
• Holds cartridge kit
• Operates with the plunger assembly and guide block
to drive the cartridge up and down for mixing
• Operates with the plunger assembly and cartridge
holder to drive the cartridge up and down for mixing
• Provides air to plunger
• Relief plunger pressure when door is opened
• Rotates mix rods during mix cycle
• Injects the hardener into the resin
• Starts the unit
• Press green buttons simultaneously to start
• Input buttons (see Fig. 4.0 and Fig. 5.0)
• Regulates the air pressure to the unit
• Stops the Unit in an Emergency
• Press to Engage
• "E-Stop!'' will be displayed,
• To reset, rotate the E-Stop knob a quarter turn
clockwise
• Displays unit status, operation and error messages.
• Protects operators when machine is in use
• Part of Plunger Assembly
• Senses the fluid level at the top of the cartridge
9
FUNCTION