Operation Function - TECHCON SYSTEMS TS6500 User Manual

5.2 Operation Function

DESCRIPTION
• Holds plunger assembly when not in use
1 Plunger Bracket
• Holds cartridge kit
• Operates with the plunger assembly and
2 Cartridge Holder
guide block to drive the cartridge up and
down for mixing
• Operates with the plunger assembly and
3 Guide Block cartridge holder to drive the cartridge up
and down for mixing
• Provides air to plunger
4 Air Plunger Inlet
• Secures cover and disengages door
5 Door Handle
• Rotates mix rods during mix cycle
Drive Spindle with
6
• Injects the hardener into the resin
Injection Rod
• Starts the unit
Start Buttons
• Press green buttons simultaneously to
7
(Green)
start
• Input buttons (see Fig. 5)
8 Control Buttons
• Regulate the air pressure to the unit
9 Air Regulator
• Stops the Unit in an Emergency
• Press to Engage
Emergency Stop
• "E-Stop!" will be displayed,
10
button (Red)
• To reset, rotate the E-Stop knob a
quarter turn clockwise
• Displays unit status, operation and error
11 LCD Display
messages.
Protective (Safety)
• Protect operators when machine in use
12
Cover
• Part or Plunger Assembly
13 Plunger Disk
• Senses the fluid level at the top of the
14 Fluid Level Sensor
cartridge
FUNCTION
9
Fluid Level
• Work with Fluid Level Sensor
15
Magnet
• Locks cartridge in place
• Applies steady pressure to prevent air
16 Plunger Assembly
entrapment
• Controls the speed of the Main Cylinder
• Rotate the flow control screw clockwise
Flow Control; Main
17 to increase the speed.
Cylinder
• Rotate the flow control screw
counterclockwise to decrease the speed
• Controls the speed of the injection rod
• Rotate the flow control screw clockwise
Flow Control;
18
to increase the speed.
Injection Rod
• Rotate the flow control screw
counterclockwise to decrease the speed
Voltage Select
• Select 115V or 230V
19
Switch
Power Input
• Input power connection
20 Socket with Fuse
Box
• Provide air filtration
21 Air Filter
• Use to install Air filter assembly and
22 Wrench
Drive spindle assembly
Accessories
• To hold wrench or other accessories
23
Bracket
Cartridge Holder
• To hold extra Cartridge Holder
24
Bracket
10