Transmit Can Message - Peak PCAN-USB FD User Manual

6.2 Transmit CAN message

1. Select the menu command Transmit / New Message.
Depending on the CAN interface, the dialog box New Transmit Message is
displayed with or without settings for CAN FD.
CAN
1. Enter the ID, Length and Data of the message. Other settings can be made
according to the connected CAN bus.
2. Enter a value into the Cycle Time field to choose manually or periodically
message transmission.
To transmit periodically enter a value greater than 0.
To transmit only manually enter the value 0.
3. Confirm the entries with OK.
The created transmit message appears on the Receive / Transmit tab.
4. To send the message manually, select the menu command Transmit > Send or
press the |space|
The manual transmission process is performed additionally for periodically
transmitted CAN messages.
6 CAN Monitor PCAN-View
User Manual 2.1.0 © 2023 PEAK-System Technik GmbH
bar.
PCAN-USB FD
CAN FD
21