Advertisement
Contents
Connections
How to handle media
Do not get fingerprints, oil or dirt on discs.
0
Take special care not to scratch discs when removing them from their
0
cases.
Do not bend or heat discs.
0
Do not enlarge the hole in the center.
0
Do not write on the labeled (printed) surface with ball-point pens,
0
pencils, etc., or stick new labels on discs.
Condensation may form on discs if they are moved suddenly from a
0
cold place (outdoors for example) to a warm place, but do not try to dry
discs with a hairdryer, etc.
Do not eject a USB flash drive or turn off the unit while a USB flash drive
0
is being played. This may result in malfunction or loss of the USB flash
drive's data.
Do not attempt to open or modify a USB flash drive.
0
USB flash drive and files can be damaged by static electricity. Do not
0
touch the metal contacts of a USB flash drive with your fingers.
Do not use warped USB flash drive.
0
After use, be sure to remove any disc or USB flash drive, and store it in
0
its proper case, to avoid dust, scratches and deformation.
Do not store discs in the following places:
0
1. Places exposed to direct sunlight for long periods of time
2. Dusty or humid places
3. Places exposed to heat from heaters, etc.
Front/Top
Rear panel
panel
Playback
Settings
Cleaning discs
If there are fingerprints or dirt on a disc, wipe them off before using the
0
disc.
Use a commercially available disc cleaning set or a soft cloth to clean
0
discs.
Gently wipe the disc from the
inside towards the outside.
NOTE
0 Do not use record spray, antistatic agents, benzene, thinner or other solvents.
130
Remote control
unit
Tips
Index
Appendix
Do not wipe with a circular
motion.
Advertisement
