Advertisement
Contents
Connections
File names on the USB flash drive are not displayed properly
The file names are not displayed properly ("...", etc.).
Characters that cannot be displayed are used. This is not a malfunction. Characters that cannot be displayed have been used. On this unit, characters
0
that cannot be displayed are replaced with a ". (period)".
Bluetooth cannot be played back
Bluetooth devices cannot be connected to this unit.
The Bluetooth function in the Bluetooth device has not been enabled. See the Owner's Manual of the Bluetooth device to enable the Bluetooth function.
0
Bring the Bluetooth device near to this unit.
0
The Bluetooth device cannot connect with this unit if it is not compatible with the A2DP profile.
0
Turn the power of the Bluetooth device off and on again, and then try again.
0
Set "Bluetooth" in the setup menu to "On". The Bluetooth function does not work when "Bluetooth" is "Off". (v p. 97)
0
Smartphones and other Bluetooth devices cannot be connected.
Smartphones and other Bluetooth devices cannot be connected when "Headphone" is set to "On". Press Bluetooth on the remote control to switch the
0
input source to Bluetooth, then connect the device. (v p. 97)
Front/Top
Rear panel
panel
Playback
Settings
113
Remote control
unit
Tips
Index
Appendix
Advertisement
