Advertisement
Contents
Connections
Factory Restore
When the unit or the network functions do not work properly, operation may be improved by restoring the firmware to the factory defaults.
Perform this operation if it does not work after attempting "General" - "Reset" of the settings menu. (v p. 95)
After performing the Factory Restore, various settings are reset to the default settings. Configure the network settings and update the firmware again.
WARNING
By initiating Factory Restore mode, you will be installing limited
recovery firmware on this unit. Functionality will remain limited
until a firmware update is performed over the Internet. Do not
perform a Factory Restore if you do not have this unit connected
to your home network.
Front/Top
Rear panel
panel
Playback
Settings
1
CONNECT
2
3
0 This operation takes time because it requires reconnecting to the network,
restoring and updating the firmware.
0 If this operation does not improve the problem, contact our customer service
center.
NOTE
0 Do not turn off the power until the Factory Restore is complete.
123
Remote control
unit
Tips
Unplug the power cord from the power outlet.
Plug in the power cord while holding down CONNECT.
When "Factory Restore" appears on the display,
release the buttons.
When the Factory Restore is complete, "Factory Restore
Completed" appears on the display for about 5 seconds, and the unit
automatically restarts.
Index
Appendix
Advertisement
