Advertisement
Contents
Connections
Tips
I want to listen to high sound performance playback
The Wi-Fi function can be stopped to prevent noise that affects the sound quality. Set "Wi-Fi" to "Off" in the setup menu. (v p. 96)
0
Stopping Bluetooth function reduces a source of noise that affects sound quality, enabling higher sound quality playback. Set "Bluetooth" to "Off" in the
0
setup menu. (v p. 97)
I want to adjust the tone myself
Set "Super Dynamic Bass", "Bass", "Treble" and "Balance" in the setting menu. (v p. 87)
0
I want sound playback that is faithful to the original sound
Set "Source Direct" in the setting menu to "On". (v p. 87)
0
I want to play TV audio at higher quality
Connect the HDMI terminal of your TV that supports the ARC function to the HDMI ARC terminal of this unit and switch the input source to HDMI.
0
(v p. 22)
If you are using a TV that does not support the ARC function or a TV that does not have an HDMI terminal, the TV audio can be played by this unit using
0
an Optical connection. (v p. 22)
Only 2-channel linear PCM can be input as the digital audio signal to this unit.
0
I want to prevent this unit from going into standby by linking to the power off operation of an HDMI connected TV
Change the "HDMI Power Off Control" setting to "Off". (v p. 90)
0
Front/Top
Rear panel
panel
Playback
Settings
101
Remote control
unit
Tips
Index
Appendix
Advertisement
