Advertisement
Contents
Connections
Various online services cannot be played
Various online services cannot be played.
The online service may have been discontinued.
0
Cannot connect to a wireless LAN network
Cannot connect to the network.
Make sure your mobile device is connected to your wireless network before setting up this unit. (v p. 49)
0
You can connect this unit to your network router using an Ethernet cable sold separately. Once connected via Ethernet, the HEOS app should
0
recognize this unit and you can manually move it to your wireless network using "Settings" - "My Devices" - ("Device Name") - "Network".
Shorten the distance from the wireless LAN access point and remove any obstructions to improve access first before re-connecting again. Place the
0
unit away from microwave ovens and other network access points.
Configure the access point channel settings away from channels that are being used by other networks.
0
This unit is not compatible with WEP (TSN).
0
Cannot connect to a WPS Router.
Check that the WPS mode of the router is operating.
0
After you press the WPS button on the router, within two minutes, press and hold the CONNECT button on the rear panel for 5 seconds. (v p. 99)
0
A router/settings that are compatible with WPS 2.0 standards are required. Set the encryption time to "None", WPA-PSK (AES) or WPA2-PSK (AES).
0
If the router encryption method is WEP/WPA-TKIP/WPA2-TKIP, you cannot connect by using the WPS button on the router. In this case, connect using
0
the HEOS app or connect by sharing the Wi-Fi setting of your iOS device. (v p. 99)
Cannot connect to the network using iPhone/iPod touch/iPad.
Update the iPhone/iPod touch/iPad firmware to the latest version.
0
When configuring the settings via a wireless connection, iOS 10.0.2 or later needs to be supported.
0
Front/Top
Rear panel
panel
Playback
Settings
118
Remote control
unit
Tips
Index
Appendix
Advertisement
