Advertisement
Contents
Connections
Audio from digital devices cannot be played back (HDMI/Optical)
"Signal Unlock" is displayed.
When digital audio signals cannot be detected properly, "Signal Unlock" is displayed. (v p. 69)
0
"Unsupported" is displayed.
"Unsupported" is displayed when audio signals that are not supported by this unit are input. Check the audio output signal format from your digital
0
device. (v p. 69)
Only the PCM 2-channel setting can be used to play sound from a TV via the HDMI ARC function. Set "PCM 2ch" as the audio format in the TV settings.
0
The input source switches to "HDMI" or "Optical"
The input source automatically switches to "HDMI" or "Optical" when the TV connected to this unit is turned on.
Set "Off" to "Auto-Play". (v p. 89)
0
The HDMI control function does not work
The HDMI control function does not work.
You cannot operate devices that are not compatible with the HDMI control function. In addition, depending on the connected device or the settings, the
0
HDMI control function may not work. In this case, operate the external device directly.
Check that the HDMI control function setting is enabled on TV connected to this unit.
0
Front/Top
Rear panel
panel
Playback
Settings
120
Remote control
unit
Tips
Index
Appendix
Advertisement
