Opera ECLIPSE Instructions Manual page 9

d. Comfort Adjustment
Simply press the button to adjust the patient's comfort from -2 to +2. Please
adjust the comfort setting if the mattress is too soft or firm to suit each patient.
Caregivers should always perform a hand check by placing their hands
underneath the patient's pelvis area to check if there is sufficient air support to
ensure the patient is not bottoming out.
e. Max Inflate Mode
The max inflate mode will rapidly inflate the mattress to maximum pressure,
allowing caregivers to perform daily nursing procedures. To cancel the max
inflate mode, press the max inflate button again. The system will automatically
change back to the previous comfort setting with alternating therapy after 20
minutes.
Alternating vs. Constant Mode
The mattress gives the choice between alternating and constant modes. The
alternating setting will provide traditional air mattress therapy whereby alternate
cells will inflate to maximum pressure, while the other cells will deflate to a
lower pressure. The constant setting will provide constant low pressure therapy,
allowing pressure to be redistributed through the mattress, subsequently
allowing blood flow to continue to common problem areas.
f. Rocker Switch
Power unit's main power switch.
g. Couplers
Quick release female couplers are used to secure
mattress air hoses to the power unit.
h. Power Receptacle
Insert power cord set firmly into receptacle.
operabeds.com | 0333 222 8584 | 8