Pro-Form PFTL28820.0 User Manual page 8

3. Orient the Tablet Holder (62) as shown. Next,
align the four holes in the Tablet Holder with the
four indicated #8 x 3/4" Shoulder Screws (15),
and press the Tablet Holder upward onto the
Shoulder Screws.
Then, using your palms, carefully hit the front
edge (A) of the Tablet Holder (62) in the direc-
tion shown by the arrows to slide the Tablet
Holder into place.
See the inset drawing. When the Tablet Holder
(62) is in place, the indicated ridge (B) will be
1/16" (2 mm) from the top of the Console (61).
4. IMPORTANT: You must activate your Console
(61) to begin using its exclusive features.
First, plug in the power cord (see page 9) and
turn on the power (see page 11).
Then, using your smartphone or tablet, go to
iFIT.com/activate and follow the instructions to
activate the Console (61).
Note: If you do not have a smartphone or tablet,
use your computer to go to iFIT.com/activate for
an alternate way to activate the Console (61). If
you do not have a computer, call Member Care
(see the front cover of this manual).
To register your product and activate your
warranty today, go to my.proform.com.
5. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure
place; one of the hex keys is used to adjust the walking belt (see page 17). Note: Extra hardware may be
included.
3
15
62
61
4
61
8
A
62
B