Page 1
Model No. PFTL28820.0 USER’S MANUAL Serial No. Write the serial number in the space above for reference. Serial Number Decal REGISTER YOUR PRODUCT To register your product and activate your warranty today, go to my.proform.com. MEMBER CARE For service at any time, go to support.proform.com.
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sus- tained by or through the use of this product.
Page 4
19. Read, understand, and test the emergency 25. When unfolding or using the treadmill, make stop procedure before using the treadmill sure that the console is locked securely (see HOW TO TURN ON THE POWER on in the upright position. Do not operate the page 11).
BEFORE YOU BEGIN ® Thank you for selecting the new PROFORM CITY L6 manual. To help us assist you, note the product model treadmill. The CITY L6 treadmill provides an impres- number and serial number before contacting us. The sive selection of features designed to make your model number and the location of the serial number workouts at home more effective and enjoyable.
ASSEMBLY 1. To use the assembly steps in this manual, first see the helpful tips below. • Remove the packing materials. Do not dispose of • After shipping, there may be an oily substance the packing materials until you fi nish the assem- on the exterior of the treadmill.
Page 8
3. Orient the Tablet Holder (62) as shown. Next, align the four holes in the Tablet Holder with the four indicated #8 x 3/4" Shoulder Screws (15), and press the Tablet Holder upward onto the Shoulder Screws. Then, using your palms, carefully hit the front edge (A) of the Tablet Holder (62) in the direc- tion shown by the arrows to slide the Tablet Holder into place.
HOW TO USE THE TREADMILL HOW TO CONNECT THE POWER CORD capable of carrying 15 or more amps. To avoid overloading the circuit, do not plug other electrical Use a Surge Suppressor devices, except for low-power devices such as cell phone chargers, into the surge suppressor or into Your treadmill, like other electronic equipment, can be an outlet on the same circuit.
Page 10
CONSOLE DIAGRAM FEATURES OF THE CONSOLE To turn on the power, see page 11. To use the manual mode, see page 11. To connect your tablet IMPORTANT: To activate your console and begin to the console, see page 13. To connect a heart rate using its exclusive features, see assembly step 4 monitor to the console, see page 13.
Page 11
HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before you turn on the power. If you do See HOW TO TURN ON THE POWER at the left.
Page 12
3. Follow your progress with the displays. To manually advance the scan cycle, press the Scan button repeatedly. The display can show the following workout information: To turn off the scan mode, press the Display button; the scan indicator and the word SCAN will Calories (CALS)—The approximate number of turn off.
Page 13
HOW TO CONNECT YOUR TABLET TO THE 5. Disconnect your tablet from the console if CONSOLE desired. The console supports Bluetooth connections to tablets To disconnect your tablet from the console, first via the iFIT app and to compatible heart rate monitors. select the disconnect option in the iFIT app.
HOW TO USE THE TABLET HOLDER THE OPTIONAL CHEST HEART RATE MONITOR IMPORTANT: The tablet holder (P) is designed Whether your for use with most full-size tablets. Do not place goal is to any other electronic device or object in the tablet burn fat or to holder.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL Remove the key and unplug the power cord. Before moving the treadmill, remove the key and unplug the power cord. CAUTION: You must be 1.
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE c. Check the power switch located on the treadmill frame near the power cord. If the switch protrudes Regular maintenance is important for optimal per- as shown (A), the switch has tripped. To reset the formance and to reduce wear. Inspect and properly power switch, wait for five minutes and then press tighten all parts each time the treadmill is used.
Page 17
SYMPTOM: The walking belt slows when walked on SYMPTOM: The walking belt is off-center or slips when walked on a. Use only a surge suppressor that meets all of the specifi cations described on page 9. a. If the walking belt is off-center, fi rst remove the key and UNPLUG THE POWER CORD.
EXERCISE GUIDELINES Aerobic Exercise—If your goal is to strengthen your WARNING: cardiovascular system, you must perform aerobic Before beginning this exercise, which is activity that requires large amounts or any exercise program, consult your physi- of oxygen for prolonged periods of time. For aerobic cian.
PART LIST Model No. PFTL28820.0 R0721A Key No. Qty. Description Key No. Qty. Description #8 x 3/4" Tek Screw Motor Belt #8 x 3/4" Pan Head Screw Frame #8 x 3/4" Screw Right Cushion Foot #8 x 1/2" Screw Left Cushion Foot #8 x 5/8"l Screw...
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...
Need help?
Do you have a question about the PFTL28820.0 and is the answer not in the manual?
Questions and answers