Page 1
Model No. PFTL27721C.0 USER’S MANUAL Serial No. Write the serial number in the space above for reference. Serial Number Decal REGISTER YOUR PRODUCT To register your product and activate your warranty today, go to iconservice.ca. MEMBER CARE Call toll-free 1-888- 936-4266 Mon.–Fri.
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sus- tained by or through the use of this product.
Page 4
17. Keep the power cord and the surge suppres- 25. Do not attempt to move the treadmill until sor away from heated surfaces. it is properly assembled. (See ASSEMBLY on page 8 and HOW TO FOLD AND MOVE 18. Never move the walking belt while the power THE TREADMILL on page 20.) You must be is turned off.
BEFORE YOU BEGIN Thank you for selecting the new PROFORM reading this manual, please see the front cover of this ® CADENCE LT treadmill. The CADENCE LT treadmill manual. To help us assist you, note the product model offers a selection of features designed to make your number and serial number before contacting us.
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly.
ASSEMBLY • Assembly requires two persons. • To identify small parts, see page 7. • Place all parts in a cleared area and remove the • Assembly requires the following tools: packing materials. Do not dispose of the packing the included hex keys materials until you fi...
Page 9
3. Attach the Left and Right Handrails (71, 72) to the Uprights (76) with four M10 x 45mm Screws (2); start all four Screws, and then tighten them. 4. With the help of a second person, hold the con- sole assembly (A) near the Uprights (76). Insert the Upright Wire (78) through the looped tie (B) on the back of the console assembly (A).
Page 10
6. Orient the Storage Latch (77) as shown. Attach the Storage Latch to the left Upright (76) with two #10 x 1" Tek Screws (7); start both Tek Screws, and then tighten them. 7. Make sure that all parts are properly tightened before you use the treadmill. To protect the floor or car- pet, place a mat under the treadmill.
HOW TO USE THE TREADMILL HOW TO CONNECT THE POWER CORD capable of carrying 15 or more amps. To avoid overloading the circuit, do not plug other electrical Use a Surge Suppressor devices, except for low-power devices such as cell phone chargers, into the surge suppressor or into Your treadmill, like other electronic equipment, can be an outlet on the same circuit.
Page 12
CONSOLE DIAGRAM FEATURES OF THE CONSOLE To turn on the power, see page 13. To use the man- ual mode, see page 13. To use an iFIT workout, see The treadmill console offers a selection of features page 15. To connect your heart rate monitor to the designed to make your workouts more effective.
Page 13
HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before you turn on the power. If you do See HOW TO TURN ON THE POWER at the left.
Page 14
3. Follow your progress with the display. To manually advance the scan cycle, press the Scan button repeatedly. The display can show the following workout information: To turn off the scan mode, press the Display button; the scan indicator and the word SCAN will Calories (CALS)—The approximate number of turn off.
Page 15
HOW TO USE AN IFIT WORKOUT 4. Select an iFIT workout. The console offers access to a large and varied library In the iFIT app, touch the buttons at the bottom of of iFIT workouts when you download the iFIT app to the screen to select either the home screen (Home your smart device and connect it to the console.
Page 16
To pause the workout, simply touch the screen or HOW TO CONNECT YOUR HEART RATE MONITOR press the Stop button. To continue the workout, TO THE CONSOLE press the play icon on the screen, or press the Start button. The console is compatible with all Bluetooth Smart heart rate monitors.
Page 17
THE SETTINGS MODE Total Distance—The letters MI or KM will appear in the display. The display will show the total 1. Select the settings mode. distance (in miles or kilometers) that the walking belt has moved. To select the settings mode, press the gear button (P).
Page 18
HOW TO CHANGE THE INCLINE OF THE TREADMILL THE OPTIONAL HEART RATE MONITOR To vary the intensity of your exercise, you can change Whether your the incline of the treadmill. There are two incline levels. goal is to Before changing the incline, remove the key and burn fat or to unplug the power cord.
IC INFORMATION This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL Before folding the treadmill, remove the key and Before moving the treadmill, fold it as described at the unplug the power cord. CAUTION: You must be left.
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE c. Check the power switch located on the treadmill frame near the power cord. If the switch protrudes Regular maintenance is important for optimal per- as shown (A), the switch has tripped. To reset the formance and to reduce wear. Inspect and properly power switch, wait for five minutes and then press tighten all parts each time the treadmill is used.
Page 22
SYMPTOM: The walking belt slows when walked on SYMPTOM: The walking belt is off-center or slips when walked on a. Use only a surge suppressor that meets all of the specifications described on page 11. a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD.
EXERCISE GUIDELINES Aerobic Exercise—If your goal is to strengthen your WARNING: cardiovascular system, you must perform aerobic Before beginning this exercise, which is activity that requires large amounts or any exercise program, consult your physi- of oxygen for prolonged periods of time. For aerobic cian.
PART LIST Model No. PFTL27721C.0 R0721A Key No. Qty. Description Key No. Qty. Description 3/8" x 2 1/4" Screw Left Platform Cushion M10 x 45mm Screw Right Platform Cushion M4.2 x 19mm Screw Latch Plate 1/4" Washer Latch Plate Spacer...
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...