Pro-Form 965 CT User Manual page 16

17. Press the two tabs (not shown) on the Tablet
Holder (41) into the slots (M) in the console
assembly (F).
Then, attach the Tablet Holder (41) with four
M4 x 16mm Machine Screws (26). Start all four
Machine Screws before tightening them. Do
not overtighten the Machine Screws.
IMPORTANT: The Tablet Holder (41) is
designed for use with most full-size tablets.
Do not place any other electronic device or
object in the Tablet Holder.
18. IMPORTANT: You must activate your Console
(80) to begin using its exclusive features.
First, plug in the power cord (see page 17) and
turn on the power (see page 19).
Then, using your smartphone or tablet, go to
iFit.com/activate and follow the instructions to
activate the Console (80).
Note: If you do not have a smartphone or tablet,
use your computer to go to iFit.com/activate for
an alternate way to activate the Console (80). If
you do not have a computer, call Customer Care
(see the front cover of this manual).
19. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the fl oor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure
place; one of the hex keys is used to adjust the walking belt (see pages 27 and 28). Note: Extra parts may be
included.
17
26
18
16
41
26
F
M
80