Installation; Quick Installation Guide; Measuring System - Endress+Hauser Smartec S CLD134 Operating Instructions Manual

Smartec S CLD134
Endress+Hauser
3

Installation

3.1

Quick installation guide

The following procedure should be followed for a complete measuring point installation:
Compact version:
• Perform an air set. Install the compact version at the measuring point (see chapter "Mounting
CLD134 compact version").
• Connect the compact version as described in the chapter "Electrical connection".
• Start up the compact version as described in the chapter "Commissioning".
Separate version:
• Mount the transmitter (see chapter "Mounting CLD134 separate version").
• If you have not yet installed the sensor at the measuring point, perform an Airset and install the
sensor (see the Technical Information of the sensor).
• Connect the sensor to the Smartec S CLD134 as described in the chapter "Electrical connection".
• Connect the transmitter as described in the chapter "Electrical connection".
• Start up the Smartec S CLD134 as described in the chapter "Commissioning".
3.1.1

Measuring system

A complete measuring system comprises:
• the Smartec S CLD134 transmitter (separate version)
• the CLS54 conductivity sensor with integrated temperature sensor and fixed cable
or
• the CLD134 compact version with integrated CLS54 conductivity sensor
Optional for the separate version: CLK5 extension cable, VBM junction box, mounting kit for pipe
mounting
Fig. 2: Complete measuring systems Smartec S CLD134 as separate transmitter and compact version
A CLS54 conductivity sensor
B Smartec S CLD134 transmitter
C Smartec S CLD134 compact version with integrated CLS54
A
C
B
ENDRESS+HAUSER ENDRESS+HAUSER
SMARTEC S SMARTEC S
ALARM ALARM
+
CAL
–
E
Installation
a0005438
11