Front and Rear Panel Features
Rear Panel Features
GPIB port
This micro-GPIB connector provides remote programming functionality via
SCPI (IEEE-488.2, 1987 with listen and talk).
For GPIB cabling, use accessory Y1260A.
LF OUT / SWEEP OUT
LF OUT: a low-frequency (0 to 10 MHz) function generator.
SWEEP OUT: Generates an output voltage ramp (0 to +10 V) when the signal
generator is sweeping.
EXT 1 IN / EXT 2 IN
External AM/FM/PM #1/#2 input. [In the future we might use these as I and Q
inputs, but that capability will not be included in initial Racer 5 release.]
CH1 EVENT 1-3
The output-only EVENT ports for channel 1 furnish programmable timing
signals generated by event n (n = 1 to 3).
CH1 TRIG 1-6
The input/output TRIG ports for channel 1 can accept or generate
programmable timing signals generated by trigger n (n= 1 to 6).
42
N5186A Getting Started Guide