Table of Contents
Advertisement
User's Manual
CAUTION: Do not install or remove an optional memory module while
Wake-up on LAN is enabled.
NOTE: The Wake-up on LAN function consumes power even when the
system is off. Leave the AC adaptor connected while using this feature.
Built-in LAN
This feature enables or disables the Built-in LAN.
Enabled
Disabled
Device Config
Device Configuration
This option lets you set the device configuration.
Setup by OS
All Devices
Parallel/Printer
This tab lets you set the Printer Port Type. Use the Windows Device Manager to
make settings for the Parallel port.
Parallel Port Mode
The options in this tab are ECP and Standard Bi-directional.
ECP
Standard
Bi-directional
7-6
Enables Built-in LAN functions. (Default)
Disables Built-in LAN functions.
Operating system sets devices that it can control. (Default)
BIOS sets all devices.
Sets the port type to Extended Capabilities Port (ECP). For
most printers, the port should be set to ECP. (Default)
This setting should be used with some other parallel
devices.
Get other manuals https://www.bkmanuals.com
Advertisement
Table of Contents
