Table of Contents
Advertisement
External monitor
port
Serial port
Parallel port
LAN jack
Ether
LAN active
indicator (orange)
Link indicator
(green)
DC IN 15V
DC IN 15V
Video-out jack
Modem jack
CAUTIONS: 1. In case of a lightning storm, unplug the modem cable
2. Do not connect the modem to a digital telephone line.
Get other manuals https://www.bkmanuals.com
This 15-pin port lets you connect an external video
display.
Use this 9-pin port to connect external serial devices such
as an external modem, a serial mouse or printer.
This Centronics-compatible, 25-pin parallel port is used to
connect a parallel printer or other parallel device. This port
supports Extended Capabilities Port (ECP) standard.
This jack lets you connect to a LAN. The adaptor has
built-in support for Ethernet LAN (10 megabits per second,
10BASE-T), Fast Ethernet LAN (100 megabits per second,
100BASE-Tx) and Gigabit Ethernet LAN (1000 megabits
per second, 1000BASE-T). The LAN has two indicators.
See Chapter 4,
Operating
This indicator glows orange when data is being exchanged
between the computer and the LAN.
This indicator glows green when the computer is connect-
ed to a LAN and the LAN is functioning properly.
The AC adaptor connects to this socket. Use only the
model of AC adaptor that comes with the computer. Using
the wrong adaptor can damage your computer.
Plug an S-Video cable into this jack for video-out. The S-
Video cable carries video signal.
In areas where an internal modem is installed as standard
equipment, there is a modem jack that lets you use a
modular cable to connect the modem directly to a tele-
phone line.
from the telephone jack.
A digital line will damage the modem.
Back side
Basics, for details.
2-5
Advertisement
Table of Contents
