Toshiba PT930 User Manual page 34

User's Manual
Graphics controller
Keyboard
Built-in
TOSHIBA Dual Pointing Device
Built-in Touch Pad
Built-in AccuPoint
Ports
Parallel
Serial
External monitor
Universal Serial Bus
(USB 2.0)
Docking interface port This port enables connection of an optional Advanced
i.LINK™ (IEEE1394)
Infrared
1-6
A 256-bit graphics controller maximizes display perfor-
mance. Refer to Appendix B
85 keys or 86 keys, compatible with IBM enhanced
keyboard, embedded numeric overlay, dedicated cursor
control, and
for details.
A Touch Pad and control buttons in the palm rest enable
control of the on-screen pointer and scrolling of windows.
This pointer control stick, located in the center of the
keybord, provides convenient control of the cursor.
Parallel printer or other parallel device (ECP compatible).
RS-232C compatible port (16550 UART compatible)
15-pin, analog VGA port supports VESA DDC2B compat-
ible functions.
The computer has three Universal Serial Bus ports that
comply with the USB 2.0 standard, which enables data
transfer speeds 40 times faster than the USB 1.1 standard.
(The ports also support USB 1.1.)
Port Replicator II described in the
This port enables high-speed data transfer directly from
external devices such as digital video cameras.
The serial infrared port is compatible with Infrared Data
Association (IrDA 1.1) standards. It enables cableless 4
Mbps, 1.152 Mbps, 115.2 kbps, 57.6 kbps, 38.4 kbps, 19.2
kbps or 9.6 kbps data transfer with IrDA 1.1 compatible
external devices.
Get other manuals https://www.bkmanuals.com
for more information.
keys. See Chapter 5,
Options
The Keyboard,
section.