Table of Contents
Advertisement
Problem
Possible cause
The electronics
"...
have overheated
and have
switched off the
corresponding
hotplate.
The hotplate was
"‰
in operation for
too long and has
switched itself off.
Incorrect connec-
—‚
tion
The hotplate has
/
—ƒ
—„
overheated and
switched itself off
to protect the hob
* Do not place hot pans close to or on the control panel.
Replacing the bulb in the oven ceiling light
If the bulb in the oven light fails, it must be replaced. Heat-
resistant, 40 watt spare bulbs can be obtained from our after-
sales service or a specialist retailer. Only use these bulbs.
:
Risk of electric shock!
Switch off the circuit breaker in the fuse box.
After-sales service
Our after-sales service is there for you if your appliance needs
to be repaired. We will always find the right solution in order to
avoid unnecessary visits from a service technician.
E number and FD number
When calling us, please give the product number (E no.) and
the production number (FD no.) so that we can provide you with
the correct advice. The rating plate containing these numbers
can be found on the right-hand side of the oven door. You can
make a note of the numbers of your appliance and the
telephone number of the after-sales service in the space below
to save time should it be required.
E no.
Energy and the environment
Your new appliance is particularly energy-efficient. You will find
information here about the energy-optimised "Hot air eco"
heating type. You will also find tips on how to save even more
energy with your appliance and how to dispose of it in an
environmentally friendly way.
Hot air eco heating type
With the energy-efficient "Hot air eco" heating type, you can
prepare many dishes on one level. The fan distributes the
energy-optimised heat from the ring heating element in the
back wall evenly around the cooking compartment. You can
achieve successful baking, roasting and cooking without
having to preheat the oven.
22
Remedy/information
Wait until the electronics
have cooled down suffi-
ciently. Touch any symbol on
the control panel.*
You can switch the hotplate
back on again immediately.
The appliance must be con-
nected by a licensed expert.
Wait until the hotplate has
cooled down.
FD no.
Place a tea towel in the oven when it is cold to prevent
1.
damage.
Remove the glass cover. To do this, press back the metal
2.
tabs with your thumb (Fig. A).
Unscrew the bulb and replace it with one of the same type
3.
(Fig. B).
Refit the glass cover. When doing this, insert it on one side
4.
and press firmly on the other side. The glass cover will click
into place.
Remove the tea towel and switch on the circuit breaker.
5.
Glass cover
You must replace a damaged glass cover. Suitable glass
covers may be obtained from the after-sales service. Please
specify the E number and FD number of your appliance.
O
After-sales service
Please note that there will be a fee for a visit by a service
technician in the event of a malfunction, even during the
warranty period.
Please find the contact data of all countries in the enclosed
customer service list.
To book an engineer visit and product advice
0344 892 8999
GB
Calls charged at local or mobile rate.
01450 2655
IE
0.03 € per minute at peak. Off peak 0.0088 € per
minute.
Rely on the professionalism of the manufacturer. You can
therefore be sure that the repair is carried out by trained service
technicians who carry original spare parts for your appliances.
Notes
Place the items in the empty cooking compartment before it
■
has heated up. Otherwise, energy optimisation will not have
any effect.
Only open the oven door during cooking when required.
■
Table
The table contains a selection of dishes best suited to Hot air
eco. It provides details on suitable temperatures and cooking
times. You can see which accessories and shelf positions are
suitable.
The temperature and cooking time depend on the amount,
composition and quality of the food. This is why temperature
Advertisement
Table of Contents
