Control knobs
The control knobs can be pushed in and remain pressed down
when they are in the "out" position. Press down on the control
knob again to release it back up.
The hob
Hotplate controls
You can use the four hotplate controls to control the heat
output provided by each hotplate.
Setting
0
Off position
1-9 Heat settings
Automatic zone con-
í
trol
When you switch on a hotplate, the indicator lamp lights up.
Residual heat indicator
The hob has a residual heat indicator for each hotplate. It
shows which hotplates are still hot. Even if the hob is switched
off, the display remains lit until the hotplate has cooled down
sufficiently.
You can save energy by using the residual heat to keep a small
dish warm, for example.
Buttons
Symbol
Button function
Switches the oven on and off
‡
Selects the type of heating
"
Selects automatic programmes
X
Press and hold = selects the memory
l
Press briefly = starts the memory
Selects automatic self-cleaning
x
Opens and closes the time-setting options
0
Selects the temperature or weight
‚
Press briefly = rapid heating
h
Press and hold = childproof lock
Press briefly = calls up the temperature
±
Press and hold = opens or closes the Basic set-
tings menu
8
Meaning
Switches off the hotplate.
1 = lowest output
9 = highest output
Switches on the large dual-circuit
hotplate or extended cooking
zone.
Symbol
Button function
Press briefly = starts/pauses operation
†
Press and hold = cancels operation
Rotary selector
The rotary selector is used to alter the default values and set
values. The
rotation symbol in the display shows which
Î
value you can adjust.
The rotary selector is retractable. Press on the rotary selector to
pop it in or out.
Display
The display shows default values which you can change with
the rotary selector as required.
The display is divided into three display areas.
Heating type display
■
The type of heating or operating mode that has been
selected is displayed.
Clock display
■
The clock, timer, cooking time and end time are displayed, as
is the weight for the automatic programmes.
Temperature display
■
The temperature, grill setting, cleaning level and programme
number are displayed.
Rotation symbol
The
Î
symbol indicates which value you can change with the
rotary selector.