Message
is lit up on the
display and the
appliance cannot
be used.
The symbol lights up
in the start display and
a buzzer sounds.
lights up yellow in
one of the temperature
displays and an alarm
also sounds.
Cause and remedy
The lock function has been activated.
Unlock the refrigeration appliance temporarily or
switch the lock function off completely (see "Se-
lecting further settings – Deactivating the lock
function / temporarily/switching off com-
pletely").
The charcoal filter replacement indicator in the
start display reminds you to replace the charcoal fil-
ter.
Replace the charcoal filter in the holder (see
"Cleaning and care – Replacing the charcoal filters
(optional accessory)") and confirm that the char-
coal filter has been replaced by touching the
OK sensor control.
The symbol will go out on the start display.
The door alarm has been activated.
Touch OK.
The alarm tone will stop and the
out.
Close the relevant appliance door.
Problem solving guide
symbol will go
81