Intex 128376NP Manual page 85

(52IO) ENGLISH POOL VOLLEYBALL SET MANUAL (FOR RECTANGULAR METAL / ULTRA FRAME) SIZE: 4.875" X 7.25" 04/15/2016
Set Up Instructions (cont.)
2. Secure the pole bracket (7) to the "U-shape" leg
with the U-bolt (2) and two nuts (3). Clockwise
tighten the dovetail screws (5) using your fingers
only. NOTE: Do not over tighten or use tool such
as pliers.
3. Insert the assembled volleyball pole into the pole
bracket (7). Secure the pole to the bracket with a
long Pin (1). Clockwise screw in the two control
screws (4) to adjust the pole vertically position.
NOTE: Adjust the pole inclination by adjusting the
two control screws (4). Do not over tighten or use
tool such as pliers.
4. Attach two volleyball net fasteners (10) to the
volleyball pole. Ensure the volleyball net
fasteners (10) are facing outward.
5. Locate the opposite "U JOINT" and attach the
second pole bracket (7) to the "U JOINT",
repeat steps #1 to #4.
6. Attach one side of the Volleyball Net (11)
starting from the top Volleyball Net
Fastener (10) and then the bottom fastener.
Loop the rope around the fastener (10) several
times and secure the end of the rope to the
two notches in the fastener. NOTE: Adjust the
length of the rope to be looped around the
fasteners depending on the size of the pool.
Repeat this procedure for the other pole.
SAVE THESE INSTRUCTIONS
Page 3
52IO
7
2
1
5
3
2
3
Fig (2)
4
8
Vertical Adjustment
1
4
4
3
2 4
7
1
Fig (3)
10
Fig (4)
10
Fig (5)
1
2
11
1
2
10
Fig (6)