Intex ECO15220-1 Owner's Manual
Hide thumbs Also See for ECO15220-1:

Advertisement

(261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14" & 16") ENGLISH 7.5" X 10.3" PANTONE 295U 06/20/2016
Model ECO15220-1 220 – 230 V~, 50 Hz, 350 W,
Hmax 5.0 m Hmin 0.19 m IPX4
Model ECO15230-1 230 – 240 V~, 50 Hz, 350 W,
Hmax 5.0 m Hmin 0.19 m IPX4
Model ECO20220-1 220 – 230 V~, 50 Hz, 650 W,
Hmax 7.5 m Hmin 0.19 m IPX4
Model ECO20230-1 230 – 240 V~, 50 Hz, 650 W,
Hmax 7.5 m Hmin 0.19 m IPX4
MAX. WATER TEMPERATURE 35
For illustrative purposes only.
Don't forget to try these other fine Intex products: pools, pool
accessories, inflatable pools and in-home toys, airbeds and boats
available at fine retailers or visit our website.
Due to a policy of continuous product improvement, Intex
reserves the right to change specifications and appearance,
which may result in updates to the instruction manual without
notice.
Rechte vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.
®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous
licence de/Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen
Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex Trading Ltd., Intex Development Co. Ltd., G.P.O
Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the European
Union by/Distribué dans l'Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union
durch/Intex Trading B.V., Venneveld 9, 4705 RR Roosendaal – The Netherlands
www.intexcorp.com
IMPORTANT
SAFETY RULES
Please read, understand, and follow all
instructions carefully before installing
and using this product. Keep for future
reference.
©2016 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Trading Ltd.
- Intex Recreation Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle
English
o
C
261-*A*-R0-1706
261A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ECO15220-1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Intex ECO15220-1

  • Page 1 Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex Trading Ltd., Intex Development Co. Ltd., G.P.O Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the European Union by/Distribué dans l’Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/Intex Trading B.V., Venneveld 9, 4705 RR Roosendaal –...
  • Page 2: Table Of Contents

    Salt & Pool Water Volumes............20 Intex Pools Salt Table..............21 Intex Pools Cyanuric Acid Table..........22 Intex Pools Operating Time Table ..........23 Non-Intex Pools Salt Table............24 Non-Intex Pools Cyanuric Acid Table.......... 24 Non-Intex Pools Operating Time Table........24 Maintenance..................
  • Page 3: Warnings

    (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 06/20/2016 English 261A IMPORTANT SAFETY RULES Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product. READ AND FOLLOW ALL INSTRUCTIONS WARNING •...
  • Page 4: Parts References

    (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 06/20/2016 English 261A PARTS REFERENCE Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. 30 31 30 35 52 37...
  • Page 5 (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 06/20/2016 SPARE PART NO. REF. NO. DESCRIPTION QTY. ECO20220-1/ECO20230-1 ECO15220-1/ECO15230-1 PRESSURE GAUGE 11224 11411 6-WAY VALVE SET 11496 11378 DRAIN OUTLET COVER...
  • Page 6 (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 06/20/2016 English 261A POOL OUTLET - STRAINER & PLUNGER VALVE SETUP (optional) The strainer grid prevents large objects from jamming and/or damaging the filter pump. If your pool has an inflatable top ring, install the strainer, nozzle and plunger valve before inflating the pool liner top ring.
  • Page 7 (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 06/20/2016 English 261A POOL INLET - NOZZLE & PLUNGER VALVE SETUP (optional) 1. In a counter-clockwise motion unscrew plunger valve union from the inlet threaded air connector (51) (see drawing 5) Be careful not to lose the step rubber washer (30).
  • Page 8: Setup Instructions

    PRODUCT SPECIFICATIONS The sand filter removes suspended particles and sanitize your pool. Pool chemistry is a specialized area and you should consult your local pool service specialist for details. Model: ECO20220-1/ECO20230-1 ECO15220-1/ECO15230-1 Wattage: 650 W 350 W Ideal Salt Level:...
  • Page 9 (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 06/20/2016 English 261A SETUP INSTRUCTIONS (continued) 4. In a clockwise motion screw filter housing nut (17) onto the motor water inlet (see drawings 12.1 &...
  • Page 10 (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 06/20/2016 English 261A SETUP INSTRUCTIONS (continued) Sand loading: IMPORTANT: Use No. 20 silica sand or glass sand with particle size range 0.45 to 0.85 mm (0.018 to 0.033 inches) and a Uniformity Coefficient less than 1.75.
  • Page 11 (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 06/20/2016 English 261A SETUP INSTRUCTIONS (continued) WARNING Improper tank valve and clamp assembly could cause the valve and clamp to blow off and cause serious injury, property damage or death. 6-way valve installation: Lower the 6-way valve over the tank slowly, and ensure the bypass pipe protruding underneath the 6-way valve fits securely into the center pipe hub (8) top opening (see...
  • Page 12 (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 06/20/2016 English 261A SAND FILTER PUMP HOSE CONNECTION SETUP WARNING • Keep this product more than 2 m away from the pool. •...
  • Page 13 1. Connect the hose (12) to the pool inlet/outlet connection with a large hose clamp. Tighten securely. POOL LARGE HOSE CLAMP For INTEX pool size 16' and below: Make sure the air jet valve (50) is securely tighten onto the pool inlet air adaptor (53) and facing up. (Adaptor B) 53 (Adaptor B)
  • Page 14: Operating Instructions

    (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 06/20/2016 English 261A OPERATING INSTRUCTIONS WARNING • Risk of electric shock. Connect this product only to a grounding type receptacle protected by a residual current device (RCD). Contact a qualified electrician if you cannot verify that the receptacle is protected by a RCD.
  • Page 15 (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 06/20/2016 English 261A OPERATING INSTRUCTIONS (continued) Initial startup and operation: Before operating, be sure that: • All the hoses have been connected and tightened securely, and correct amount of filter sand have been loaded.
  • Page 16 “BACKWASH” under “initial startup and operation” section. Vacuuming device (i.e. Intex auto pool cleaner) attached to the system may also cause the flow to diminish and the pressure to rise. Remove any vacuuming device from the system and check if the pressure gauge reading has dropped from the yellow zone to the green zone.
  • Page 17 (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 06/20/2016 English 261A SALTWATER SYSTEM OPERATION 1. Start up the unit: Plug the power cord into the electrical outlet and test the RCD (circuit breaker).
  • Page 18 (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 06/20/2016 English 261A SALTWATER SYSTEM OPERATION (continued) 5. Boost cycle • First time installation, press and hold “BOOST” button for 5 seconds until the indicator lights up and the LED display “80”.
  • Page 19: Led Code Chart

    (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 06/20/2016 English 261A LED CODE CHART LED Reading Definitions Filter Pump Working Mode Boost Mode Stand-By Mode (Start-up) Minimum Operating Hour (1 hour remaining) Operating Hours (2 hours remaining) Operating Hours (3 hours remaining) Operating Hours (4 hours remaining)
  • Page 20: Salt & Pool Water Volumes

    (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 06/20/2016 English 261A SALT & POOL WATER VOLUMES • Which kind of salt to use: For use within the European Union, salt must be from an authorized salt supplier registered with the European Chemicals Agency (ECHA) - visit echa.europa.eu.
  • Page 21: Intex Pools Salt Table

    ECO15220-1/ ECO20230-1 ECO15230-1 ECO20230-1 ECO15230-1 (Gals) (Liters) (Lbs) (Kgs) (Lbs) (Kgs) (Lbs) (Kgs) (Lbs) (Kgs) INTEX ABOVE GROUND POOLS (AGP’s) 15' x 33" (457cm x 84cm) 2587 9792 15' x 36" (457cm x 91cm) 2822 10681 15' x 42" (457cm x 107cm)
  • Page 22: Intex Pools Cyanuric Acid Table

    (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 06/20/2016 English 261A INTEX POOLS CYANURIC ACID TABLE Cyanuric acid is a chemical that reduces the loss of chlorine in water due to ultraviolet rays. To maintain maximum performance, we recommend that the cyanuric acid level be maintained at approximately 1% of the salt, i.e.
  • Page 23: Intex Pools Operating Time Table

    (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 06/20/2016 English 261A INTEX POOLS OPERATING TIME TABLE (WITH CYANURIC ACID) Water Capacity Operating Time (hours) (Calculated at 90% for at different ambient/air...
  • Page 24: Non-Intex Pools Salt Table

    15000 6000 22500 8000 30000 8500 32000 10000 37500 12000 45500 14000 53000 CYANURIC ACID TABLE FOR COMMON NON-INTEX POOLS Cyanuric Acid Needed for Startup 0.03g/L (30ppm) Water Capacity ECO20220-1/ECO20230-1 ECO15220-1/ECO15230-1 (Gals) (Liters) (Lbs) (Kgs) (Lbs) (Kgs) 2000 7500 0.23 0.23...
  • Page 25 (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 06/20/2016 English 261A MOTOR PRE-FILTER CLEANING AND MAINTENANCE It is essential to change any damaged element or set of elements as soon as possible. Use only parts approved by the manufacturer.
  • Page 26 (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 06/20/2016 English 261A PRIMARY ELECTROLYTIC CELL CLEANING The electrodes have a self cleaning function incorporated into the electronic control’s programming. In most cases this self cleaning action will keep the electrodes working at optimum efficiency.
  • Page 27: Maintenance

    261A MAINTENANCE (continued) ® INTEX TEST STRIPS (PACKED WITH THE PRODUCT) The Test Strips can test the “Free Chlorine”, “pH”, “Calcium Hardness” and “Total Alkalinity” levels at the same time. We recommend that you test the water chemistry weekly, and maintain the chlorine concentration at 0.5-3 ppm.
  • Page 28 (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 06/20/2016 English 261A POOL MAINTENANCE & CHEMICAL DEFINITIONS Preferred Water Chemistry Reading Minimum Ideal Maximum Free Chlorine 0.5 - 3.0 ppm 5.0 ppm Combined Chlorine 0 ppm...
  • Page 29: Long Term Storage

    (261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 06/20/2016 English 261A LONG TERM STORAGE & WINTERIZATION CAUTION Allowing the water to freeze will damage the sand filter and void the warranty.
  • Page 30: Troubleshooting Guide

    • Dirt or sand on pool floor. • Operate the filter for longer periods. • The basket is restricting the water flow. • Use Intex pool vacuum to clean bottom of pool. • Clean the basket. • Clogged inlet or discharge.
  • Page 31 NO LED DISPLAY • No power supply. receptacle. • RCD has not reseted. • Reset the RCD. • A power fuse has blown. • Contact Intex Service Center. • LED failure. • Contact Intex Service Center. Page 31 SAVE THESE INSTRUCTIONS...
  • Page 32 • Ensure that the cell cord is plugged firmly into 3. Electrolytic cell cord is loose. the cell housing receptacle. • Contact Intex Service Center. Replace the cell if 4. Possible electrolytic cell failure. needed. • Partially drain the pool and refill it with fresh 1.
  • Page 33: Common Pool Problems

    • Finger tighten all caps. LEVEL • The drain valves are loose. SEDIMENT • Dirt or sand on pool • Heavy use, getting in • Use Intex pool vacuum to clean ON POOL floor. and out of pool. bottom of pool. BOTTOM SURFACE •...
  • Page 34: Limited Warranty

    Other than this warranty, and other legal rights in your country, no further warranties are implied. To the extent possibly in your country, in no event shall Intex be liable to you or any third party for direct or consequential damages arising out of the use of your Sand Filter Pump &...

This manual is also suitable for:

Eco15230-1Eco20220-1Eco20230-1

Table of Contents

Save PDF