Table of Contents
Advertisement
Tips for Using a USB Storage Device
A USB storage device that has a built-in automatic recognition programme or uses its own
driver might not be recognisable.
Some USB storage devices may not be supported or may not work properly.
If you use a USB extension cable, the USB storage device may not be recognised or may
not work properly.
Please use only USB storage devices formatted with the FAT32 or NTFS file system
provided by Windows OS. Only reading is possible for USB storage devices formatted in
exFAT format.
It is recommended that you use an external USB HDD with a rated voltage of 5 V or less
and a rated current of 500 mA or less. If you use a device requiring a higher voltage/current
than the rated voltage/current, it may not operate properly due to lack of current.
It is recommended that you use a USB hub or USB storage device with a power supply.
We recommend using a storage device with a capacity of 32 GB for the USB memory and
2 TB or less for the USB hard disk.
If a USB HDD with power-saving function does not work, turn the hard drive off and on
again to make it work properly. See the owner's manual for the USB HDD for more
information.
Data on a USB storage device may be damaged, so it is recommended that you back up
any important files. Users are responsible for data management. The manufacturer bears
no responsibility.
Press the
button on the remote control. To remove the USB storage device, press the
Eject
button, which appears at the top when you focus on the USB storage device you
want to remove. If you disconnect the USB storage device without selecting
may occur in your TV or storage device.
When you connect a USB storage device of a file system not supported by the TV to the
USB IN
port, the format message appears. To use the connected USB storage device, you
should format the device first.
Formatting deletes all data stored on the USB storage device, and the device is formatted
with the NTFS or FAT32 file system.
Home Dashboard
Run
connected USB from
storage device.
When connecting a USB storage device, a random file/folder can be created to provide
Smart TV services such as the saving and retrieving of thumbnail images.
Using the Media Player
by pressing the
Home Dashboard
button on the remote control. Select the
Format
and select the
57
Eject
, an error
button to format the USB
Advertisement
Table of Contents
