Table of Contents
Advertisement
Sets Teletext language.
In Digital Mode Only
To Set Teletext Language
Use the Teletext language function when two or more Teletext languages are broadcast.
Press the
button on the remote control.
01
Select
General System Language Primary Teletext
02
Language/Secondary Teletext
In Digital Mode Only
If Teletext data in a selected language is not broadcast, the default language will be
displayed.
If you select the wrong local country, teletext may not appear correctly on the screen and
some problems may occur during teletext operation.
CI Information
CI Information
You can view information about the currently connected CI.
General Programmes CI Information
If you use a CI module or CAM module,
This function enables you to watch some encrypted services (pay services).
●
If you remove the CI Module, you cannot watch pay services.
●
CI (Common Interface) functions may not be possible depending upon the country
●
broadcasting circumstances.
When the module is inserted into the CI slot, you can access the module menu.
●
To purchase a module and smart card, contact each service provider.
●
When the TV is turned on after inserting a CI Module, you may not have any video and
●
audio output in scrambled programme.
When using a CAM (Conditional Access Module), please make sure it meets fully the
●
requirements of either DVB-CI or CI plus.
Language.
44
Advertisement
Table of Contents
