Related Manuals for LG 55EG9200-CA
Summary of Contents for LG 55EG9200-CA
- Page 1 OWNER’S MANUAL Please read this manual carefully before operating your set and retain it for future reference. EG92** EG96** www.lg.com...
-
Page 2: Table Of Contents
TABLE OF CONTENTS TABLE OF CONTENTS LICENSES USING THE USER GUIDE OPEN SOURCE SOFTWARE NOTICE MAINTENANCE INFORMATION Cleaning your TV - Screen, frame, cabinet and stand - Power cord SAFETY INSTRUCTIONS - Viewing 3D Imaging (Only 3D Models) TROUBLESHOOTING INSTALLATION PROCEDURE SPECIFICATIONS ASSEMBLING AND PREPARING Unpacking... -
Page 3: Licenses
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com. -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS Please read these safety precautions carefully before using the product. Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured. WARNING Insert power cable plug completely into wall socket otherwise if not secured completely into socket, fire ignition may break out. - Page 5 SAFETY INSTRUCTIONS Do not drop the product or let it fall over when connecting external Do not drop metallic objects such as coins, hair pins, chopsticks or wire devices. Otherwise, this may result in injury or damage to the product. into the product, or inflammable objects such as paper and matches. Children must pay particular attention. Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre. Keep the anti-moisture packing material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out Do not spray water on the product or scrub with an inflammable of the reach of children. substance (thinner or benzene). Fire or electric shock accident can occur. Do not let your children climb or cling onto the TV. Otherwise, the TV may fall over, which may cause serious injury. Do not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen. You may be injured or the product can be damaged. Dispose of used batteries carefully to ensure that a small child does not consume them. Please seek Doctor- Medical Attention immediately if child consumes batteries. Never touch this product or antenna during a thunder or lighting storm. You may be electrocuted. Do not insert any metal objects/conductors (like a metal chopstick/ cutlery/screwdriver) between power cable plug and input Wall Socket Never touch the wall outlet when there is leakage of gas, open the while it is connected to the input terminal on the wall. Additionally, windows and ventilate. It may cause a fire or a burn by a spark. do not touch the power cable right after plugging into the wall input terminal. You may be electrocuted. (Depending on model) Do not disassemble, repair or modify the product at your own discretion. Fire or electric shock accident can occur. Do not put or store inflammable substances near the product. There is Contact the service centre for check, calibration or repair. a danger of combustion/explosion or fire due to careless handling of the inflammable substances.
- Page 6 This may result in fire or electric shock. Only use an authorized AC adapter and power cord approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction or product deformation. Unplug the TV from AC mains wall socket if you do not intend to use the TV for a long period of time.
- Page 7 SAFETY INSTRUCTIONS CAUTION We recommend that you maintain a distance of at least 2 to 7 times the diagonal screen size when watching TV. If you watch TV for a long period of time, this may cause blurred vision. Install the product where no radio wave occurs. Only use the specified type of battery.
- Page 8 SAFETY INSTRUCTIONS Do not turn the product On/Off by plugging-in or unplugging the Do not press strongly upon the panel with a hand or sharp object such power plug to the wall outlet. (Do not use the power plug for switch.) as nail, pencil or pen, or make a scratch on it, as it may cause damage It may cause mechanical failure or could give an electric shock. to screen. Avoid touching the screen or holding your finger(s) against it for long Please follow the installation instructions below to prevent the periods of time. Doing so may produce some temporary or permanent product from overheating. distortion/damage to screen. • The distance between the product and the wall should be more than 10 cm. • Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a cupboard). • Do not install the product on a carpet or cushion. • Make sure the air vent is not blocked by a tablecloth or curtain. When cleaning the product and its components, unplug the power Otherwise, this may result in fire. first and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the product and its panel. Otherwise, this may result in fire, electric shock or product damage (deformation, corrosion or breakage). Take care not to touch the ventilation openings when watching the TV for long periods as the ventilation openings may become hot. This does not affect the operation or performance of the product. As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
- Page 9 SAFETY INSTRUCTIONS When moving or unpacking the product, work in pairs because the Displaying a still image (e.g., broadcasting channel logo, on-screen product is heavy. Otherwise, this may result in injury. menu, scene from a video game or computer screen) for a prolonged time may cause damage to the screen, resulting in retention of the image, which is known as image sticking. It can remain for long time or never disappear. The warranty does not cover the product for image sticking. Avoid displaying a fixed image on your television’s screen for a Contact the service centre once a year to clean the internal parts of prolonged period (1 or more hours for OLED). the product. Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking Accumulated dust can cause mechanical failure. may occur on the borders of the panel. This phenomenon also occurs in third-party products and is not subject to exchange or refund. Generated Sound Refer all servicing to qualified service personnel. Servicing is required “Cracking” noise: A cracking noise that occurs when watching or when the apparatus has been damaged in any way, such as power turning off the TV is generated by plastic thermal contraction due to supply cord or plug is damaged, liquid has been spilled or objects have tempera-ture and humidity. This noise is common for products where fallen into the apparatus, the apparatus has been exposed to rain or thermal deformation is required. Electrical circuit humming/panel moisture, does not operate normally, or has been dropped. buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depend-ing on the product. This generated sound does not affect the performance and reliability of the product. If the product feels cold to the touch, there may be a small “ flicker” Do not use high voltage electrical goods near the TV(e.g. electric when it is turned on. This is normal, there is nothing wrong with mosquito-swatter). This may result in product malfunction. product.
-
Page 10: Viewing 3D Imaging (Only 3D Models)
• Elderly Symptoms which require - The elderly may perceive less 3D effect compared to the discontinuation or refraining from young. Do not sit closer to the TV than the recommended watching 3D contents distance. • Do not watch 3D contents when you feel fatigue from lack of Cautions when using the 3D glasses sleep, overwork or drinking. • Make sure to use LG 3D glasses. Otherwise, you may not be able • When these symptoms are experienced, stop using/watching 3D to view 3D videos properly. contents and get enough rest until the symptom subsides. - Consult your doctor when the symptoms persist. • Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles. Symptoms may include headache, eyeball pain, dizziness, • Using modified 3D glasses may cause eye strain or image nausea, palpitation, blurriness, discomfort, double image, distortion. -
Page 11: Installation Procedure
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING NOTE • Image shown may differ from your TV. • Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. • The available menus and options may differ from the input source or product model that you are using. • New features may be added to this TV in the future. • The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption. • The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost. INSTALLATION PROCEDURE Open the package and make sure all the accessories are included. C onnect an external device to the TV set. M ake sure the network connection is available. You can use the TV network functions only when the network connection is made. If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may take a few minutes. ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item. CAUTION • Do not use any unapproved items to ensure the safety and product life span. • Any damages or injuries by using unapproved items are not covered by the manufacturer’s warranty. • Some models have a thin film attached on to the screen and this must not be removed. - Page 12 ASSEMBLING AND PREPARING Magic remote, Batteries (AA) Owner’s manual Cinema 3D glasses (See p. 27) The number of 3D glasses may differ depending on the model or country. Component gender cable Composite gender cable Cable Holder (See p. 24) (See p. 24, 25) (See p. 21) Stand Body / Stand Base Stand Body / Stand Base Stand Body / Stand Base (Only 55EG92**) (Only 55EG96**) (Only 65EG96**) (See p. 17) (See p. 17) (See p. 18) Stand Screw 5 EA, M4 x L20 (Only 55EG92**, 55EG96**) 8 EA, M4 x L20 (Only 65EG96**) (See p. 17, 19)
-
Page 13: Separate Purchase
ASSEMBLING AND PREPARING Separate purchase Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. AG-F*** AN-MR600 AN-VC550 AG-F***DP Cinema 3D Glasses Magic Remote Smart Camera Dual Play Glasses LG Audio Device Compatibility EG92** EG96** AG-F*** • • Cinema 3D Glasses AN-MR600 • • Magic Remote AN-VC550 • • Smart Camera AG-F***DP • • Dual Play Glasses LG Audio Device • • The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies. -
Page 14: Parts And Buttons
ASSEMBLING AND PREPARING Parts and buttons Screen Speakers Joystick Button Remote Control Sensor and Intelligent Sensor Power Indicator (EG92**) Power LG Logo Light (EG96**) Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. (Depending on model) Joystick Button - This button is located below the TV screen. NOTE • You can set the LG Logo Light to on or off by selecting GENERAL in the main menus. (Depending on model) -
Page 15: Using The Joystick Button
ASSEMBLING AND PREPARING Using the joystick button You can operate the TV by pressing the button or moving the joystick left, right, up, or down. Basic Functions Power On When the TV is turned off, place your finger on the joystick button and press it once and release it. When the TV is turned on, place your finger on the joystick button and press it once for a few Power Off seconds and release it. All running apps will close, and any recording in progresswill stop. If you place your finger over the joystick button and move it left or right, you can adjust the Volume Control volume level you want. Programmes If you place your finger over the joystick button and move it up or down, you can scrolls through Change the saved programmes you want. NOTE • When your finger over the joystick button and push it to the up, down, left or right, be careful not to press the joystick button. If you press the joystick button first, you may not be able to adjust the volume level and saved programmes. Adjusting the Menu When the TV is turned on, press the joystick button one time. You can adjust the Menu items moving the joystick button up, down, left or right. Turns the power off. Clears on-screen displays and returns to TV viewing. Changes the input source. Accesses the Quick Settings. -
Page 16: Lifting And Moving The Tv
ASSEMBLING AND PREPARING Lifting and moving the TV • When transporting a large TV, there should be at least 2 people. • When transporting the TV by hand, hold the TV as shown in the Please note the following advice to prevent the TV from being following illustration. -
Page 17: Setting Up The Tv
ASSEMBLING AND PREPARING Setting up the TV Image shown may differ from your TV. Attaching the stand 55EG92**, 55EG96** Protective Package 5 EA M4 x L20 Stand Cover 1 When assembling the stand, lay the front screen Protective Package included in the product box on a table or flat surface and then place the TV screen face down on the Protective Package. CAUTION • Do not lift your TV without the stand. The protruding Joystick Stand Cover Button may be damaged. Stand Body / Stand Base Stand Body / Stand Base CAUTION • Insert the protruding parts of the Stand Cover into the holes. - Page 18 ASSEMBLING AND PREPARING 65EG96** Stand Cover Protective Package Stand Cover 1 When assembling the stand, lay the front screen Protective Package included in the product box on a table or flat surface and then place the TV screen face down on the Protective Package. CAUTION • ...
- Page 19 ASSEMBLING AND PREPARING Stand Cover Stand Body / Stand Base 8 EA M4 x L20 Cover Holder CAUTION Stand Cover • Insert the Cover Holder of the Stand Cover into the holes until it clicks. Press the Stand Cover gently so that the non- woven fabric inside is attached tightly.
-
Page 20: Mounting On A Table
ASSEMBLING AND PREPARING Mounting on a table Securing the TV to a wall (This feature is not available for all models.) Lift and tilt the TV into its upright position on a table. - L eave a 10 cm (minimum) space from the wall for proper ventilation. 10 cm 10 cm Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. - If there are bolts inserted at the eye-bolts position, remove the bolts first. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV. Connect the eye-bolts and wall brackets tightly with a sturdy 10 cm 5 cm rope. Make sure to keep the rope horizontal with the flat surface. CAUTION • Make sure that children do not climb on or hang on the TV. NOTE • Use a platform or cabinet that is strong and large enough to support the TV securely. -
Page 21: Mounting On A Wall
ASSEMBLING AND PREPARING Mounting on a wall CAUTION Attach an optional wall mount bracket at the rear of the TV carefully • Disconnect the power first, and then move or install the TV. and install the wall mount bracket on a solid wall perpendicular to Otherwise electric shock may occur. the floor. When you attach the TV to other building materials, please • If you install the TV on a ceiling or slanted wall, it may fall contact qualified personnel. and result in severe injury. LG recommends that wall mounting be performed by a qualified Use an authorized LG wall mount and contact the local professional installer. dealer or qualified personnel. • Do not over tighten the screws as this may cause damage to the TV and void your warranty. • Use the screws and wall mounts that meet the standard. Any damages or injuries by misuse or using an improper 10 cm accessory are not covered by the warranty. NOTE • Use the screws that are listed on the standard screw specifications. • The wall mount kit includes an installation manual and necessary parts. • The wall mount bracket is not provided. You can obtain additional accessories from your local dealer. -
Page 22: Making Connections
MAKING CONNECTIONS MAKING CONNECTIONS Antenna Connection Connect the TV to a wall antenna socket with an RF cable (75 Ω). This section on MAKING CONNECTIONS mainly uses diagrams for the EG96** models. VHF Antenna UHF Antenna Connect various external devices to the TV and switch input modes to select an external device. -
Page 23: Hdmi Connection
MAKING CONNECTIONS HDMI connection → → → Picture → HDMI ULTRA HD Deep Colour On: Support 4K @ 60 Hz (4:4:4, 4:2:2, 4:2:0) Transmits the digital video and audio signals from an external device Off: Support 4K @ 60 Hz (4:2:0) to the TV. -
Page 24: Dvi To Hdmi Connection
MAKING CONNECTIONS DVI to HDMI connection Component connection Transmits analogue video and audio signals from an external device to the Transmits the digital video signal from an external device to the TV. TV. Connect the external device and the TV with a component gender cable Connect the external device and the TV with the DVI-HDMI cable as as shown. -
Page 25: Composite Connection
MAKING CONNECTIONS Composite connection Audio connection Transmits analogue video and audio signals from an external device You may use an external audio system instead of the built-in speaker. to the TV. Connect the external device and the TV with a composite gender cable as shown. -
Page 26: Headphone Connection
MAKING CONNECTIONS Headphone connection USB connection (Only EG96**) Connect a USB storage device such as a USB flash memory, external Transmits the headphone signal from the TV to an external device. Con- hard drive or a USB memory card reader to the TV and access the Smart nect the external device and the TV with the headphone as shown. -
Page 27: Magic Remote Functions
MAGIC REMOTE FUNCTIONS MAGIC REMOTE FUNCTIONS When the message “Magic Remote battery is low. Change the battery.” is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control toward the remote control sensor on the TV. -
Page 28: Registering Magic Remote
MAGIC REMOTE FUNCTIONS / USING THE USER GUIDE USING THE USER GUIDE Registering magic remote User Guide allows you to more easily access the detailed TV informa- How to register the magic remote tion. To use the Magic Remote, first pair it with your TV. 1 Put batteries into the Magic Remote and turn the TV on. -
Page 29: Maintenance
MAINTENANCE / TROUBLESHOOTING MAINTENANCE TROUBLESHOOTING Cannot control the TV with the remote control. • Check the remote control sensor on the product and try again. Cleaning your TV • Check if there is any obstacle between the product and the remote control. Clean your TV regularly to keep the best performance and to extend • Check if the batteries are still working and properly installed the product lifespan. to to No image display and no sound is produced. CAUTION • Check if the product is turned on. • Check if the power cord is connected to a wall outlet. • Make sure to turn the power off and disconnect the power cord • Check if there is a problem in the wall outlet by connecting other and all other cables first. products. • When the TV is left unattended and unused for a long time, The TV turns off suddenly. disconnect the power cord from the wall outlet to prevent • Check the power control settings. The power supply may be possible damage from lightning or power surges. interrupted. • Check if the Sleep Timer or Off Time feature is activated in the TIME settings. -
Page 30: Specifications
Product specifications may be changed without prior notice due to upgrade of product functions. For the power supply and power consumption, refer to the label attached to the product. Thickness Depth EG92** MODELS 55EG9200-CA With stand (mm) 1225 x 762 x 191 Dimensions (W x H x T(D)) Without stand (mm) 1225 x 719 x 48.9(87.3) - Page 31 SPECIFICATIONS Wireless module(LGSBW41)Specifications Wireless LAN Bluetooth Standard IEEE 802.11a/b/g/n Standard Bluetooth Version 4.0 2400 to 2483.5MHz Frequency Range 5150 to 5250 MHz Frequency Range 2400 to 2483.5 MHz 5725 to 5850 MHz 802.11a: 13 dBm 802.11b: 15 dBm Output Power Output Power 802.11g: 14 dBm 10 dBm or Lower (Max.) (Max.) 802.11n - 2.4 GHz: 16 dBm 802.11n - 5 GHz: 16 dBm • Because band channel used by the country could be different, the user can not change or adjust the operating frequency and this product is set for the regional frequency table. • This device should be installed and operated with minimum distance 20 cm between the device and your body. And this phrase is for the general statement for consideration of user environment.
- Page 32 Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. MODEL SERIAL...
- Page 33 OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com...
- Page 34 KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button...
- Page 35 (TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.
- Page 36 EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &...
- Page 37 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
- Page 38 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
- Page 39 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
- Page 40 EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 14. Bass (Command: k s) 09. Tint (Command: k j) ► To adjust Bass. ► To adjust the screen tint. You can also adjust in the AUDIO menu.
- Page 41 EXTERNAL CONTROL DEVICE SETUP Set ID = All = 00 5th Band 20(decimal) Data 00 & 01 = Channel Data is 10 = 00 0a Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00 * It depends on model, and can adjust when sound mode is EQ adjustable value.
- Page 42 EXTERNAL CONTROL DEVICE SETUP Number Data 05 = Digital Antenna TV = 02 - 22 : Antenna TV (DTV) – Don’t Use Physical Total = ma 00 00 00 11 00 01 02 Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical 2.
- Page 43 11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data X : don’t care 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] ISDB-BS (Japan)
- Page 44 EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : To set Ack [u][ ][Set ID][ ][OK/NG][Data][x]...