Table of Contents
Advertisement
General Network Wired Connection (Ethernet)
If you configure settings for the network, you can use various services such as online
contents and applications.
If the router connected to the network supports the DHCP feature, connecting the TV
and router by wire will automatically connects to the network. If the automatic setup is
not supported, you can select
The IPv6 setup does not support
For more information on how to connect to the network, see
webOS TV Connecting to the Network
Setting a Wireless Network
If you configure settings for the network, you can use various services such as online
contents and applications.
If you have set the TV up for a wireless network, you can check and connect to the
available wireless Internet networks.
Press the
button on the remote control.
01
Select
General Network Wi-Fi
02
Set to On.
03
Select the wireless router to connect.
04
For more detailed settings, select
Add a hidden wireless network
If you input the name of network directly, you can add a wireless network.
Connect via WPS PBC.
If the wireless router you want to connect to has a Wi-Fi Protected Setup-Push Button
Configuration (WPS-PBC) feature, you can easily connect to the wireless router by
pressing the WPS-PBC button on the router. Press the wireless router's WPS-PBC
button and then press the TV's [Connect] button.
Connect via WPS PIN.
This is a method to connect to an access point using a Wi-Fi Protected Setup-
Personal Identification Number (WPS-PIN). Select the access point you want to
connect to. Enter the PIN displayed on the access point's Wi-Fi device.
Advanced Wi-Fi Settings
Edit
to manually set up the network connection.
Edit
.
User Guide
in
Connection.
Other
Network.
104
Getting Started with LG
.
Advertisement
Table of Contents
