Related Manuals for LG 55EC930V.AEK
Summary of Contents for LG 55EC930V.AEK
- Page 1 OWNER’S MANUAL Please read this manual carefully before operating your set and retain it for future reference. EC93** EC97** EC98** www.lg.com *MFL68488304* P/NO : MFL68488304 (1407-REV00) Printed in Korea...
-
Page 2: Table Of Contents
TABLE OF CONTENTS TABLE OF CONTENTS 37 REMOTE CONTROL LICENSES 39 MAGIC REMOTE FUNCTIONS OPEN SOURCE SOFTWARE NOTICE Registering Magic Remote How to use magic remote Precautions to Take when Using the Magic EXTERNAL CONTROL DEVICE Remote SETUP 41 USING THE USER GUIDE SAFETY INSTRUCTIONS 42 MAINTENANCE - Viewing 3D Imaging... -
Page 3: Licenses
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of per- forming such distribution (such as the cost of media, shipping and handling) upon email request to open- source@lge.com. -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS Please read these safety precautions carefully before using the product. WARNING y Do not place the TV and/or remote control in the following environments: - A location exposed to direct sunlight - An area with high humidity such as a bathroom - Near any heat source such as stoves and other devices that produce heat - Near kitchen counters or humidifiers where they can easily be exposed to steam or oil... - Page 5 SAFETY INSTRUCTIONS y Do not plug too many electrical devices into a single multiple electrical outlet. Otherwise, this may result in fire due to over-heating. y Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product.
- Page 6 SAFETY INSTRUCTIONS y Do not disassemble, repair or modify the product at your own discretion. Fire or electric shock accident can occur. Contact the service centre for check, calibration or repair. y If any of the following occur, unplug the product immediately and contact your local service centre.
- Page 7 SAFETY INSTRUCTIONS CAUTION y Install the product where no radio wave occurs. y There should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls. This may cause an electric shock. y Do not install the product on places such as unstable shelves or inclined surfaces.
- Page 8 SAFETY INSTRUCTIONS y Do not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.) It may cause mechanical failure or could give an electric shock. y Please follow the installation instructions below to prevent the product from over- heating.
- Page 9 SAFETY INSTRUCTIONS y When moving or unpacking the product, work in pairs because the product is heavy. Otherwise, this may result in injury. y Contact the service centre once a year to clean the internal parts of the product. Accumulated dust can cause mechanical failure. y Refer all servicing to qualified service personnel.
-
Page 10: Viewing 3D Imaging
SAFETY INSTRUCTIONS Viewing 3D Imaging WARNING Viewing Environment y Viewing Time - When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness y Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents. - Page 11 Cautions when using the 3D glasses y Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly. y Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.
-
Page 12: Installation Procedure
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING NOTE y Image shown may differ from your TV. y Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. y The available menus and options may differ from the input source or product model that you are using. y New features may be added to this TV in the future. - Page 13 ASSEMBLING AND PREPARING Remote control, Magic remote, Owner’s manual Cinema 3D glasses Batteries (AAA) Batteries (AA) The number of 3D (Depending on model) (See p. 39) glasses may differ (See p. 37, 38) depending on the model or country. Cable Holder Component gender Composite gender HDMI Cable...
-
Page 14: Separate Purchase
Contact your dealer to buy these items. These devices only work with certain models. AG-F*** AN-MR500 AN-VC5** AG-F***DP Cinema 3D Glasses Magic Remote Video call camera Dual Play Glasses LG Audio Device Tag On Compatibility EC93** EC97** EC98** AG-F*** • • •... -
Page 15: Parts And Buttons
ASSEMBLING AND PREPARING Parts and buttons A type: EC93** <Front> <Rear> Screen Speakers Remote Control Sensor and Intelligent Sensor LG Logo Light Joystick button B type: EC97** Built-In Camera Screen Speakers Remote Control Sensor and Intelligent Sensor LG Logo Light... - Page 16 2 Joystick Button - This button is located behind the TV screen. 3 Joystick Button - This button is located below the TV screen. NOTE y You can set the LG Logo Light to on or off by selecting GENERAL in the main menus.
-
Page 17: Using The Joystick Button
ASSEMBLING AND PREPARING Using the joystick button You can operate the TV by pressing the button or moving the joystick left, right, up, or down. Basic Functions When the TV is turned off, place your finger on the joystick button Power On and press it once and release it. -
Page 18: Lifting And Moving The Tv
ASSEMBLING AND PREPARING Lifting and moving the TV y When transporting a large TV, there should be at least 2 people. y When transporting the TV by hand, hold the Please note the following advice to prevent the TV as shown in the following illustration. TV from being scratched or damaged and for safe transportation regardless of its type and size. -
Page 19: Setting Up The Tv
ASSEMBLING AND PREPARING Setting up the TV (Only EC97**) Back cover Image shown may differ from your TV. Detaching the stand (Only EC93**, EC98**) Screen 8 EA M4 x L20 (Only EC93**) 4 EA M4 x L20 Back cover (Only EC98**) M4 x L20 Screen CAUTION... -
Page 20: Assembling The Av Cover
ASSEMBLING AND PREPARING Mounting on a table Assembling the AV cover 1 Lift and tilt the TV into its upright position on a Assemble the AV Cover as shown. table. - Leave a 10 cm (minimum) space from the wall (Only EC93**) for proper ventilation. -
Page 21: Mounting On A Wall
LG recommends that wall mounting be performed by a qualified professional installer. We recommend the use of LG’s wall mount bracket. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. -
Page 22: Wall Type Set-Up Guide
If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. 2 Assemble Guide spacer (4EA) and Guide Use an authorized LG wall mount and spacer screws (4EA). contact the local dealer or qualified personnel. -
Page 23: How To Detach The Stand
ASSEMBLING AND PREPARING How to detach the stand Type 2. Hanging the TV on the wall after removing a stand. Type 1. Hanging the TV on the wall before removing a stand. Wall mount bracket CAUTION y When laying the TV on its back on a padded table or surface, be careful to prevent the TV from being damaged. -
Page 24: Tidying Cables
ASSEMBLING AND PREPARING Tidying cables Image shown may differ from your TV. ** Stand Type ** (Only EC93**) Gather and bind the cables with the cable holder. Wall mount bracket Cable Holder (Only EC97**) 1 Put the cable management in the hole of TV back cover. - Page 25 ASSEMBLING AND PREPARING 2 Fix the cable management with cable management (Only EC98**) Screw. Gather and bind the cables with the cable holder. Cable Holder M4 x L10 2 EA 3 Gather and bind the cables with the cable holder. Arrange the cable in the cable mangement.
-
Page 26: Using Built-In Camera
ASSEMBLING AND PREPARING Using Built-in Camera Preparing Built-in Camera 1 Pull up the built-in camera at the back of the TV. (Only EC97**, EC98**) Angle Adjustment Lever Slide NOTE y Before using the built-in camera, you must recognize the fact that you are legally responsible for the use or misuse of the camera by the relevant national laws including the criminal law. -
Page 27: Name Of Parts Of Built-In Camera
ASSEMBLING AND PREPARING 3 Push down the built-in camera when you are not using it. Name of Parts of Built-in camera Camera Lens Protective Film Microphone Checking the Camera’s Shooting Range (Home) button on the remote 1 Press the control to display the HOME menu. Select CAMERA and then press the Wheel(OK) button. -
Page 28: Making Connections
MAKING CONNECTIONS MAKING Antenna Connection CONNECTIONS This section on MAKING CONNECTIONS mainly uses diagrams for the EC93** models. Connect various external devices to the TV and switch input modes to select an external device. For Wall Antenna more information on external device’s connection, Socket refer to the manual provided with each device. -
Page 29: Satellite Dish Connection
MAKING CONNECTIONS Satellite dish Connection (Only EC97**) (Only satellite models) Satellite Dish (*Not Provided) 13/18V ANTENNA/ 700mA Max CABLE LNB IN Satellite Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω). HDMI Connection HDMI DVD / Blu-Ray / PC /... -
Page 30: Dvi To Hdmi Connection
MAKING CONNECTIONS DVI to HDMI Connection Transmits the digital video and audio signals from an external device to the TV. Connect the external (Only EC93**) device and the TV with the HDMI cable as shown. ARC (Audio Return Channel) y An external audio device that supports SIMPLINK and ARC must be connected using HDMI/DVI IN 1 (ARC) or HDMI(4K @ 60 Hz)/DVI IN 2 (ARC) port. -
Page 31: Mhl Connection
MAKING CONNECTIONS MHL Connection (Only EC98**) (Only EC93**) (4K@60Hz) ( Audio in) (*Not MHL passive Provided) cable (*Not Provided) AUDIO OUT DVI OUT DVD / Blu-Ray / PC / HD Cable Box / HD STB Transmits the digital video signal from an external device to the TV. -
Page 32: Component Connection
MAKING CONNECTIONS Component Connection Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to television sets. NOTE y Connect the mobile phone to the HDMI/DVI IN 4 (MHL) or HDMI(4K @ 60 Hz)/DVI IN 4 (MHL) port to view the phone screen on the TV. -
Page 33: Composite Connection
MAKING CONNECTIONS Composite Connection Headphone Connection COMPONENT VIDEO AUDIO Ext.Speaker / H/P ( Audio in) YELLOW (Use the composite gender cable provided.) (*Not Provided) Transmits the headphone signal from the TV to an external device. Connect the external device and the TV with the headphone as shown. (*Not Provided) NOTE y AUDIO menu items are disabled when con-... -
Page 34: Audio Connection
MAKING CONNECTIONS Audio Connection USB Connection (Only EC93**) OPTICAL DIGITAL AUDIO (*Not Provided) OPTICAL AUDIO IN (*Not Provided) (*Not Provided) (*Not Provided) Digital Audio System (Only EC97**, EC98**) You may use an external audio system instead of the built-in speaker. Digital optical audio connection Transmits a digital audio signal from the TV to an external device. -
Page 35: Ci Module Connection
MAKING CONNECTIONS CI module Connection Connect a USB storage device such as a USB flash memory, external hard drive or a USB memory card reader to the TV and access the Smart Share menu to use various multimedia files. NOTE y Some USB Hubs may not work. -
Page 36: Euro Scart Connection
MAKING CONNECTIONS Euro Scart Connection NOTE y Any Euro scart cable used must be signal shielded. y When watching digital TV in 3D imaging mode, only 2D out signals cannot be output through the SCART cable. y If you use the Time Machine function on digital TV, TV out signals cannot be output through the SCART cable. -
Page 37: Remote Control
REMOTE CONTROL REMOTE CONTROL (Depending on model) The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching ends to the label inside the compartment, and close the battery cover. - Page 38 REMOTE CONTROL (POWER) Turns the TV on or off. INPUT Changes the input source. SETTINGS Accesses the main menus. Q. MENU Accesses the quick menus. INFO Views the information of the current programme and screen. • (User Guide) Sees user-guide. Number buttons Enters numbers. (Space) Opens an empty space on the screen keyboard. GUIDE Shows programme guide.
-
Page 39: Magic Remote Functions
MAGIC REMOTE FUNCTIONS MAGIC REMOTE FUNCTIONS When the message “Magic Remote battery is low. Change the battery.” is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control toward the remote control sensor on the TV. -
Page 40: Registering Magic Remote
MAGIC REMOTE FUNCTIONS How to use magic remote Voice recognition Network connection is required to use the voice recognition function. 1. Press the Voice recognition button. y Shake the Magic Remote 2. Speak when the voice display window ap- slightly to the right and left or pears on the left of the TV screen. -
Page 41: Precautions To Take When Using The Magic Remote
MAGIC REMOTE FUNCTIONS / USING THE USER GUIDE USING THE USER Precautions to Take when Using the Magic Remote GUIDE y Use the Magic Remote within the maximum communication distance (10 m). Using the Magic Remote beyond this distance, or User Guide allows you to more easily access the with an object obstructing it, may cause a detailed TV information. -
Page 42: Maintenance
MAINTENANCE MAINTENANCE Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION y Make sure to turn the power off and disconnect the power cord and all other cables first. y When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. -
Page 43: Troubleshooting
TROUBLESHOOTING TROUBLESHOOTING Problem Solution Cannot control the y Check the remote control sensor on the product and try again. y Check if there is any obstacle between the product and the remote control. TV with the remote y Check if the batteries are still working and properly installed ( control. -
Page 44: Specifications
SPECIFICATIONS SPECIFICATIONS (Only EC93**) Wireless module(LGSBW41)Specifications Wireless LAN Bluetooth Standard IEEE 802.11a/b/g/n Standard Bluetooth Version 3.0 2400 to 2483.5MHz Frequency Range 5150 to 5250 MHz Frequency Range 2400 to 2483.5MHz 5725 to 5850 MHz(for Non EU) 802.11a: 13 dBm 802.11b: 15 dBm Output Power (Max.) 10dBm or Lower Output Power (Max.) - Page 45 SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. 55EC93** MODEL 55EC930V-ZA 1225 x 753 x 204 With stand (mm) Dimensions (W x H x D) 1225 x 715 x 44 Without stand (mm) With stand (kg) 16.7 Weight...
- Page 48 Please contact LG First. If you have any inquiries or comments, please contact LG customer information centre. Customer Information Centre Country Service Country Service 0 810 144 131 0900 543 5454 015 200 255 800 187 40 0032 15 200 255...