Statement Regarding The Vibration Emission - Norton clipper CDR 133 Operating Instructions And Spare Parts List

VERS.2015.05.19

2.5 Statement regarding the vibration emission

Declared value of vibration emission following EN 12096.
Machine Measured value of vibration
Model / code
KIT CDR 133 +
CDM 163
70184694704

The vibration value is lower and does not exceed 2.5 m/s².

Values determined using the procedure described in the standard EN 12348.

The measurements are made with new machines. Actual values may vary with site conditions, in
terms of:
 Materials worked
 Wear Machine
 Lack of maintenance
 Inappropriate tool for application
 Tool in poor condition
 Unskilled operator
 Etc...

The exposure time to vibration is based on the performance of work (related to the adequacy
Machine / Tool / worked material / operator)

When evaluating risks due to hand-arm vibration, you need to take into account effective usage
at rated power of machine during a full day of work; quite often you will realise that effective
utilisation time represents around 50% of overall duration of work. You have to consider, of
course, breaks, water feeding, preparation of work, time to move the machine, disk mounting...
2
emission at m/s
< 2.5
Kit CDR 133 + CDM 163_MAN_EN
Uncertainty K
2
m/s
0.5 Pro CB BETON
Tool used
Model / code
11