VERS.2015.05.19
2.5
Statement regarding the vibration emission
Declared value of vibration emission following EN 12096.
Machine
Measured value of vibration
Model / code
KIT CDR 353 +
NBM 351
70184694707
The vibration value is lower and does not exceed 2.5 m/s².
Values determined using the procedure described in the standard EN 12348.
The measurements are made with new machines. Actual values may vary with site
conditions, in terms of:
Materials worked
Wear Machine
Lack of maintenance
Inappropriate tool for application
Tool in poor condition
Unskilled operator
Etc...
The exposure time to vibration is based on the performance of work (related to the
adequacy Machine / Tool / worked material / operator)
When evaluating risks due to hand-arm vibration, you need to take into account effective
usage at rated power of machine during a full day of work; quite often you will realise that
effective utilisation time represents around 50% of overall duration of work. You have to
consider, of course, breaks, water feeding, preparation of work, time to move the
machine, disk mounting...
2
emission at m/s
< 2.5
Kit CDR 353 + NBM 351_MAN_EN
Uncertainty K
2
m/s
0.5
Pro CB BETON
Tool used
Model / code
11