Table of Contents
Advertisement
VERS.2015.05.19
Kit CDR 133 + CDM 163_MAN_EN
2 MACHINE DESCRIPTION
Any modification, which could lead to a change in the original characteristics of the machine, may
be done only by Saint-Gobain Abrasives who shall confirm that the machine is still in conformity with
the safety regulations.
2.1 Short description
The CDR 133 core drill rig is designed for durability and high performance for onsite wet and dry
drilling operations of a wide range of masonry and natural stone products.
As with all other NORTON products, the operator will immediately appreciate the attention given to
detail and quality of materials used in construction. The machine and its component parts are
assembled to high standards assuring long life and minimum maintenance.
2.2 Purpose of use
The machine is designed for drilling a large range of building materials. It is not designed for drilling
wood or metals, except steel reinforcing securely embedded in concrete.
2.3 Layout
There are two main parts on the core drilling rig CDR 133: the motor and the rig itself.
The rig is made of sectional aluminium, which reduces the weight of the machine allowing easy
transportation. The base ensures stability of the rig, and allows two ways of fixing the rig: using a
vacuum pump or fixing anchors. The rig is equipped with a collar, so that the motor can be fitted or
removed quickly from the rig
Three different types of electric motor are available on the CDR 133, offering excellent quality of
drilling and extended life duration. Every motor is equipped with a P.R.C.D. (Portable Residual
Current Device). This circuit breaker protects the motor from an electrical overload. The P.R.C.D. is
a circuit breaker and not a switch. Always stop the motor using its switch and not the P.R.C.D.
9
Advertisement
Table of Contents
