E-Mon Class 3200 Installation Instructions Manual page 40

10.3.4 Display Hold Feature
You can "lock" the scrolling display so that it will stay locked on any one of the seven
screens.
To stop the display from scrolling, complete the following steps:
1. Press the UP and DOWN buttons to choose which of the six screens you would
like to display.
2. Press the Select button. At the top of the display, you will see the message
HOLD1. This will lock the display for 1 HOUR.
NOTE: The display hold feature has different selectable time periods.
3. Pressing Select again will show the message HOLD6. This will lock the display
for 6 HOURS.
4. Continuing to press the Select button will provide additional timing choices:
HOLD12: Locks the display for 12 HOURS
HOLD24: Locks the display for 24 HOURS
HOLD: Locks the display indefinitely
To exit the HOLD mode:
Press the Select button as many times as needed until the HOLD message disappears
from the display.
** Be sure to exit from the HOLD mode when you are done using this feature.
62-0390-02 40