Table of Contents
Advertisement
Procedure:
Note:
Bluetooth tones and Bluetooth preprogrammed buttons
must be preprogrammed by a qualified radio
technician. Check with your dealer or system
administrator for more information.
With your radio's Bluetooth feature ON, and the Bluetooth tones
enabled:
1
Turn on the accessory, then place it close to your radio
aligning the Bluetooth Pairing Spot on your radio to the
Bluetooth Pairing Spot (a blue dot) on the accessory.
2
If the pairing process is successful your radio sounds an
incremental-pitched tone to indicate paired.
OR
If the pairing process fails, your radio sounds a short, low-
pitched tone. The display shows PAIRFAIL. Repeat step 1
again.
3
Your radio continues to connect to the device.
If the connecting process is successful, the blue LED blinks
solid blue for two seconds, your radio sounds an
incremental-pitched tone. The display shows <Device
Type> CONNCTED, and the Bluetooth icon turns from
a
.
OR
If the device already has pairing records and the connecting
process fails, the blue LED blinks rapid blue for two seconds
and your radio sounds a short, low-pitched tone. Your radio
display shows <Device Type> CON FAIL. Repeat step 2 to
reconnect the Bluetooth device.
OR
If the connecting process is immediately following the
pairing process and the connecting process fails to
complete within the 6 seconds, your radio sounds a
decremental-pitched tone to indicate unpaired. Your radio
display shows <Device Type> UNPAIRED. Repeat step 1
to re-initiate the pairing process.
Note:
If Bluetooth Replace Pairing Info feature is enabled, it
allows existing Bluetooth pairing information to be
replaced when another accessory of the same type
attempts to pair with your radio. This only occurs when
the previously-connected accessory has become
disconnected, whether or not the Bluetooth Drop Timer
has expired.
Indicating the Bluetooth Connection is Lost
Your radio shows
connection. Below is the scenario and radio indications when
the connection is interrupted.
b
to
Procedure:
1
The blue LED blinks rapid blue for two seconds. The
Bluetooth icon starts blinking for 10 seconds. Your radio
sounds an decremental-pitched tone and the display shows
<Device Type> alternates with CON LOST.
a
when the devices have a Bluetooth
51
English
Advertisement
Table of Contents
