Operating Instructions; Seat Cushion - Seating Matters Milano Instruction Manual

Operating
Instructions

Seat Cushion

Removal and fitting of the modular
Seating Matters cushion (fig.1).
The underside of the Seating Matters
cushion is upholstered with non-slip
material, which creates a friction contact
when the chair is occupied. To fit the
cushion correctly, place the cushion onto
the seat base of the chair, with the non-slip
underside of the cushion facing downwards
(fig.1a). The rear, zipped end of the cushion
should be facing towards the back of
the chair (fig.1b). See cushion label for
orientation. To remove the cushion, simply
lift it out from the chair.
(fig.1a)
Correct fitment of the Seating Matters cushion is important as the structure of the foam
allows good immersion ONLY when fitted as instructed above.
Front Back
(fig.1)
(fig.1b)
Side Internal
5