Equipment Installation; Unit Dimensions; Package Dimensions - Tripp Lite SmartRack NEMA 4 Owner's Manual

7. Equipment Installation

29
28
Warning: Do not install equipment until you have stabilized the enclosure. Install heavier equipment first and
install it towards the bottom of the enclosure. Install equipment starting from the bottom of the enclosure and
proceeding toward the top of the enclosure—never the reverse. If using sliding equipment rails, be careful when
27
extending the rails. Do not extend more than one set of sliding equipment rails at one time. Avoid extending
sliding equipment rails near the top of the enclosure.
26
Note: The tapped holes in the middle of each rack unit are numbered and also include a small notch to aid in identification. A single rack
unit includes the space occupied by the numbered hole and the holes directly above and below.
25
24 24
23
22
8. Specifications
21
20

8.1 Unit Dimensions

MODEL
19
HEIGHT
18
WIDTH
DEPTH
WEIGHT

8.2 Package Dimensions

MODEL
HEIGHT
WIDTH
DEPTH
WEIGHT
1 Rack Unit
1 RACK UNIT
SRN4G12UHD
25.4 in.
(645 mm)
24 in.
(610 mm)
36.16 in.
(918 mm)
180 lb.
(81.6 kg)
SRN4G12UHD
31.5 in.
(800 mm)
28 in.
(711 mm)
41 in.
(1041 mm)
220 lb.
(99.8 kg)
9
29
28
27
26
25
24 24
23
22
21
20
SRN4G18UHD
19
35.9 in.
(912 mm)
18
24 in.
(610 mm)
36.16 in.
(918 mm)
227.8 lb.
(103.3 kg)
SRN4G18UHD
42 in.
(1067 mm)
28 in.
(711 mm)
41 in.
(1041 mm)
280 lb.
(127 kg)