C. INSTALLATION OF RETURN AIR COVER
1) Remove Return Air Grille from the Return Air
Cover.
2) Place the Return Air Cover up to Ceiling Template.
3) Install Cover to Template with #8 x 3/8" blunt point
phillips head screws provided (6 required).
4) Reinstall Return Air Grille into Return Air cover.
5) Install two (2) hole plugs into screw holes in back
of return air grille. Align tabs with mating notches
and snap into place.
MOUNTING PARTS
A (2) #10 x 1/2" long sharp point sheet metal screws
B (4) 1/4" – #20 x 7 bolts
C (7) #8 x 5/8" long sharp point wood screws
D (1) Romex connector
E (1) Machine screw, 3/8" long
F (2) #10 – 24 hex nuts
G Cover plate
Low
Voltage
Cable
AIR BOX INSTALLATION LAYOUT
AIR CONDITIONING
UNIT
THREADED
HOLE IN
BOTTOM
MOUNTING
BOLT
JUNCTION
BOX
LOW VOLTAGE
CABLE
AIR BOX
10
Thermostat Cable
Return
Air Cover
Hole
Plugs
Return
Air
Grille
DISCHARGE
AIR OPENING
NUT
RETAINERS
MOUNTING
BOLT
UPPER DISCHARGE
AIR DUCT
POWER SUPPLY
LINE
THERMOSTAT
CABLE
FRAMING
STOCK
DISCHARGE
AIR DUCT
CEILING
TEMPLATE