VTech BM4200N User Manual page 10

Main Sub-
menu menu
Alert settings
Temperature
Sound activation - screen and audio
/
VOX (Voice Activated Alert) Sensitivity
• Set the parent unit to beep when the battery is low.
• Set the parent unit to beep when the link between the parent unit and the
baby unit is lost.
• Set the confirmation tone on or off when selecting an option in the
menus.
• Set the parent unit to beep when the baby unit detects sounds while in
Split mode (For BM4200N-2 only).
/
• Turn on/off temperature alert tone.
• Set the parent unit to beeps whenever the room temperature detected by the
baby unit falls outside of the set temperature range.
• Set the minimum temperature.
• Set the maximum temperature.
• Set temperature display in Fahrenheit (
Turn on/off sound activation
• Set sound activation on or off.
• When it is on, and the baby unit detects no sound, the parent unit screen
stays off to save power. Once a sound is detected, the parent unit screen and
speaker turns on automatically, and you can see and hear your baby. The
parent unit will then turn off again after 50 seconds of no sound detection.
Note
• When the parent unit screen is off and it receives alerts, for example, link lost
between parent unit and baby unit, or battery is low, the parent unit screen
and speaker will turn on for 10 seconds.
• You can set VOX sensitivity level to activate parent unit screen and sound
when baby unit detects sounds that exceed certain levels. See Sound
sensitivity and sound activation section.
F) or Celsius (
o
10
C)
o