Getting Started; Time And Alarm Setting - Hyundai AC 9281 Instruction Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 16

3.GETTING STARTED

• Open battery Cover (C1)
• Insert 2 x AAA size batteries observing polarity [" +" and " –" marks]
• Replace battery compartment cover
• Place the unit onto flat surface; the unit is ready for use now.

4. TIME AND ALARM SETTING

4.1 Radio Controlled Time:
• After the start-up of the unit, the clock automatically starts to scan the DCF time signal. Radio
Control Icon "
(A2) flashes,
Indicating now is receiving
DCF signal
• The clock automatically synchronized with the DCF radio signal every day at 2.00 am & 3.00
am to maintain accurate time keeping. If synchronization with the DCF radio signal fails,
"
" on LCD disappear and the clock then attempts to synchronize with the DCF radio
signal at 4.00 am and 5am.
• The clock can be set to scan the radio signal manually by holding "-"&"+" buttons (B3&B4) for
3 seconds. Each reception takes around several minutes. If receptions fail, scanning stops.
("
" on LCD disappear) and repeats again on next full hour. E.g. scanning failed at
8:20a.m. It will scan again at 9:00 a.m.
• Stop scanning DCF radio signal by holding "-"&"+" button (B3&B4) for 3 seconds.
• "
" shown on the LCD if it is in Daylight Saving Time Mode.
4.2 Manual Time Setting:
• In time display, hold "TIME" button (B2) for 3 seconds to enter Clock/Calendar setting Mode.
• Press "-" (B3) or "+" (B4) button to adjust the setting and press "TIME" button (B2) to confirm
each setting.
(By keeping the "-" (B3) or "+" (B4) button pressed, could accelerate the process and reach
the desired value more quickly)
• The setting sequence is shown as follow:, Hour, Minute, Second, Year, Day-Month Sequence,
Month, Date, Time Zone, Language of Weekday.
• There are 8 languages, English, German, French, Spanish, Italian, Dutch, Polish and Czech,
for day-of-week. The languages and their selected abbreviations for each day of the week are
shown in the following table.
" (A2) flashes on LCD.
(A2) turns on,
Indicating signal received
successfully
Indicating signal reception
failed
EN - 17
(A2) disappear,
EN

Advertisement

Table of Contents
loading

Table of Contents