D-Link DSL-G2452DG User Manual page 19

Section 3 - Getting Started
Configure your Internet connection using the drop-down menus. Select either ADSL or VDSL
from WAN Access Type. Use the Country and ISP drop-down menus to quickly configure
the VPI, and VCI settings. To manually configure these settings, select Not Listed.
Select your ISP's Encapsulation type and MTU, and click Next to continue.
If the router detected that a username and password is required, enter your ISP's PPPoE
username and password and click Next to continue.
Note: Make sure to remove your PPPoE software from your computer. The software is no longer
needed and will not work through a router.
D-Link DSL-G2452DG User Manual
Setup Wizard (continued)
PPPoE
Internet DSL-G2452DG
To setup this Internet connection, you will need to have a User Name from your Internet
Service Provider. If you do not have this information, please contact your ISP.
Username:
Password:
Wi-Fi Client
Back Next
15