Safety Instructions; Intended Use - Assa Abloy effeff 843ZY-1 Q41 Series Installation And Mounting Instructions

Safety instructions

!
Warning!
Danger to life during fail-locked operation in escape routes: Locking systems
in escape routes must unlock in the event of a power failure. During fail-locked
operation, the escape route may remain locked when people are trying to escape.
· The door bolt must only be used in fail-unlocked operation in escape routes.

Intended use

The 843ZY door bolt is an electrically operated magnetic bolt for additional
locking of a swing door in a dry environment in private or commercial use. For the
intended function of the door bolt, the accompanying striking plate must be
mounted with a magnet for detecting the opening status of the door.
The electrical installation and mounting must be carried out by specialist
tradesmen from the relevant trade or trained persons.
The door bolt can be mounted in a suitably milled or sawn lock pocket. The door
bolt can also be surface-mounted with the accessories offered by ASSA ABLOY
Sicherheitstechnik. On glass doors, the door bolt must be surface-mounted in a
suitable surface-mounted casing.
The door bolt can be mounted vertically or horizontally in the door leaf or door
frame. If the bolt is mounted in the door leaf, the cables must be routed via a
suitable cable bushing.
The door bolt must not be mounted in the floor due to the risk of tripping. When
mounting on the bottom of the door leaf, the striking plate must be mounted
sunk into the ground.
The device is suitable for installation and use as per these instructions. It is not
intended for any other type of use.
EN
26 Functions