Standard Warranty Terms And Conditions - Texas A/S BC358D User Manual

17. Standard warranty terms and conditions

The warranty period is 2 years for private end users in EU countries.
Products sold for commercial use, only have a warranty period of 1 year.
The warranty covers material and/or fabrication faults.
Restrictions and requirements
Normal wear and replacement of wearing parts are NOT covered by the warranty.
Wearing parts, which are NOT covered for more than 12 months:
• Blades
• Spools with nylon line (trimmerheads)
• Cables
• Switches
• Membranes/gaskets
• Spark plugs
• Engine liquids (oil, gasoline, grease)
• Starter cords
• Filters
If you start the engine without adding correct fuel mix of gasoline and 2-stroke oil, it will be
damaged and cannot be repaired and therefore not covered by the warranty.
The warranty does NOT cover damages/faults caused by:
• Lack of service and maintenance
• Structural changes
• Exposure to unusual external conditions
• Damages to the bodywork, deck, handles, panels etc.
• If the machine has been improperly used or overloaded
• Wrong use of oil, gasoline, grease or other liquid types, which are not recommended in
this user manual
• Bad or dirty gasoline, which results in contamination of the fuel system
• Use of unoriginal spare parts.
• Other conditions where Texas cannot be held responsible.
Whether a case is a warranty claim or not is determined in each case by an authorized
service center.
Your receipt is your warranty note, why it should always be kept safe.
REMEMBER: The purchase of spare parts as well as any request for warranty repair,
model number, year and serial number should always been informed. It can be found on
the CE-label on the machine!
* We reserve the right to change the conditions and accept no liability for any misprints
29