Network Connector; About The Software - Epson SureColor SC-T3270 Series Network Manual

Network connector

RJ-45 connector: This connector is used to connect an Ethernet cable to a network. You can use this
cable for 10Base-T, 100Base-TX, and 1000Base-T Ethernet.
Important:
c
You must use the following shielded twisted-pair cable to connect the network interface to a
network.
❏ Category-5 or higher for the 10Base-T or 100Base-TX connection
❏ Category-6 or higher for the 1000Base-T connection

About the Software

The Software Disc provided with your printer includes the following network software.
Note:
The software provided varies depending on your printer model.
❏ EpsonNet Config for Windows is a Windows-based configuration utility for administrators that
allows you to configure the network interface for various protocols such as TCP/IP, and SNMP.
See "EpsonNet Config for Windows" on page 31.
❏ EpsonNet Config for Mac OS is a Mac OS-based configuration utility for administrators that
allows you to configure the network interface for TCP/IP. See "EpsonNet Config for Mac OS" on
page 32.
❏ EpsonNet Config with Web Browser and Remote Manager are Web-based configuration utility
programs that allow you to configure a network interface for TCP/IP and SNMP. See "EpsonNet
Config with Web Browser" on page 33 and "Remote Manager" on page 37.
❏ EpsonNet Print is a utility program that provides peer to peer printing to Epson printers on the
TCP/IP network. See "EpsonNet Print (For Windows Users)" on page 38.
Epson Network Guide
Introduction 10