Epson SureColor SC-T3270 Series Network Manual page 55

Sample 2
Open the Setup tab in Remote Manager and configure Security > IPsec/Access Control > Group
Policy settings for each client.
Refusing Access from Unauthorized Clients
Open the Setup tab in Remote Manager and configure Security > IPsec/Access Control > Default
Policy settings as follows:
Option
IPsec/Access Control
Default Policy > Access Control
Print Client Settings
Separate IPsec/Access Control > Group Policy settings must be created for each of the Service
Name > RAW (Port 9100), ENPC,
policies are applied in order from Group Policy 1.
Option
Group Policy n (n = 1–10)
Access Control
Remote Address (Host)
Method of Choose Port
Service Name
1. An Epson protocol used by Epson printer and scanner drivers and such applications as EpsonNet Config to find the
printer.
2. A static IP address is recommended. If DHCP or "obtain automatically" (IPv6) is selected, the connection may terminate
when the lease or address expires.
Note:
Select TCP or UDP for Protocol when Local Port is selected for Method of Choose Port > Port
Number.
Setting
Enable
Access Refuse
1
and SNMP options as shown in the example below. Group
Setting
RAW (Port 9100)
Enable
Access Permission
2 Enter the print client IP address (prefix length can be used to specify range if desired).
Example (IPv4): 192.168.0.0/24
Service Name
RAW (Port 9100)
ENPC
ENPC
Epson Network Guide
SNMP
SNMP
Tips for Administrator 55